TTC ☆ OFFICIAL

I wore mine for a bit but it got hot. I hope someone got a picture. @KENNY and his lady wore theirs the while time, they were awesome.

 

I have flag poles - this is a 3 x 5 Come and take it. I will just swap out one of the driveway flags on Holidays.



Someone needed it more than me, and I was so happy to put it back in the raffle!

 

Here's a picture from the other day.

 

@Mrprotaganist , @KENNY & Eicho (sp - sorry), had a costume - no pix sorry. Someone I didn't meet had a Ghostbusters get up - that I have a shot of. Working on pix......

 

That was Kevin.

 

I have a countless amount of photos of her. You ready???
This one shows how she sits at our dining table in her own chair while we eat.

 

You get to butcher and bury a cow all with one tool! Nice!

 

I have some notes.

Have you checked the bolts to your valve covers? Mine were looking too in my 93 and I checked and they weren't even hand tight. So I torqued em down and problem solved.

Tundra brakes would be dope. Also if you lifted the rear you can either do the BPV bracket or just adjust the BPV itself for free.

I really want 17s and may be selling the black KMC 16s if you're interested, I'll give em to you at the price Jack gave me

 

Haha I hope so..I'm so happy with it gonna use it to finish the sprinklers that recently broke.

 

Got your stuff in the truck, you won two raffle items and got your cutting board

 

It's not a for.sure thing yet, but I keep thinking 17s would look better than 16s on my tundra.


The BPV is the rear brake proportioning valve. It sits above your rear diff.
Here's a tundra thread about em, although they call it something else. It's the same damn thing.
https://www.tundras.com/threads/better-braking-brakes-easy.33217/
Or here's a link to a bracket that'll also fit the rear brakes if you have a rear lift
https://www.yotamasters.com/shop/br...e-proportioning-valve-relocation-bracket-kit/

 

Great to meet everyone had a good time.
The drive back to Houston sucked. It took 30mins to go 5 miles because of 3 crashes and no open shoulder on both sides. I fell asleep parked on the freeway for a couple mins.

 

Great morning with TTC at COTA followed by some frisby time in the coastal with Gunner. One awesome day!

 

Yup you probably need to make an adjustment

 

I had a great time meeting everyone an catching up with y'all. Great turn out TTC brass did a great job with everything. Loved seeing the costumes an rigs from stock to fully armored an locked. Everyone so down to earth an a wealth of knowledge. I'm proud to be a small part of this.

 

No doubt brother

 

Lol there's that option and a few other companies make brackets as well with more adjustment holes. However the cheaper options would be to just loosen the two nuts and move em upward like the tundra thread says. And if that don't have enough room to see a noticeable gain in rear braking, you to a hardware store and buy a longer i-bolt or whatever it's called for like 2.bucks lol

 

Final option being to make your own bracket out of shit in your garage I guess.

 

Better check that weather report. Last I saw we were due for more rain at the end of the week.

 

Get a 2nd gen all the problems fixed