Mirror trim part mising after windshield replacement

I have a call into the vendor that did the work but I could use some community help. I just picked up a used 2016 SR5 (really enjoying it!). At the time of purchase I worked out with the selling dealer to have the windshield replaced because of a large gash on the interior wright in my frame of view. I have now had that done but the vendor's tech did not reinstall the trim that covers the mirror power wiring. I found the large section and was able to clip it in place but now there is a space between that long section and the headliner.

Can anyone snap a picture of that piece that is against the headliner for me?
.....gonna see if they can get it resolved or source it myself.

Thanks everyone - this community has been a great information resource!

 

Pics.

 

some kinda rectangular trim missing...

 

Thank you @Dacon I found that one you highlighted on the floor and clipped it in but there is this gap. I dunno, new windshield have the button lower? Got a trim piece above that to the headliner on yours?

 

That trim piece of adjustable. Just hold down the bottom part with one hand, and pull on the other end to "extend" it over the gap.

 

thank you @here4cake and @Dacon - I'm clearly a software guy and NOT a hardware guy. It was collapsed all the way and I didn't catch it e expanded. Thank you so much for the newbie help!!