South Carolina BS thread under new MANAGEMENT and lives in SC

One of the Hi-Lift screws. If I have a chance tomorrow, I’ll get some pictures.

 

Rich- Check here:

https://www.hardwoodstore.com/ipe-brazilian-walnut

Also- like Skip- I like Brazilian Ipe wood. It is a Brazian Walnut- so dense and heavy it does not float! Love the varied colors.

 

Oh got ya yeah I would just block the tent up a bit to clear them. Then just get longer bolts to attach the tent.

 

I had to go get loner ones since the ones provided weren’t long enough. The block idea is good. What does everyone suggest I use as a spacer?

 

Ipe is sick I love that stuff. I made a couple of salad bowls from an off-cut I got from the Hardwood store. The one you linked it's like 5 min. from me. Love that place

 

A piece of wood will work temporarily. But I'd look to get some solid bar stock of aluminium.

 

What about that dude on here that sells those aluminum machined seat risers?

 

Could check him out. I’ll fiddle with it some more on Saturday when I’m off and see if I can’t work something out before I have to go to plan B.

 

https://www.tacomaworld.com/threads/fs-aluminum-seat-spacers-for-seat-mod.563843/

 

I wish I had somewhere around here to get some good wood from. All I have nearby is big box stores and a commercial lumber yard.

 

Heck. I might end up going with some of that 8ft flooring.

 

This may be what you need
https://www.amazon.com/FEELDO-Aftermarket-Antenna-Adapter-Accessories/dp/B074FRJDKR

 

Wonder if the blue wire is important?

 

Click the link, scroll to the middle of the page, that's where I got the instructions below

https://www.ebay.com/itm/Toyota-Radio-Antenna-Adapter-Cable-/252122355019

Toyota Radio Antenna Adapter Cable
Product Description
Converts the Toyota OEM head unit antenna connection to a standard female connection

Allows installation of an aftermarket antenna that has a male connector

Note: BLUE wire needs to be connected to the BLUE remote antenna wire
(or if not available please connect to the ignition ACC+ wire of your car/stereo.)

Allows installation of a late model Toyota OEM radio into an older Toyota vehicle

 

Lights out, Gorilla radio...fuckit...... cut the cord. Or that green wire.

 

Cut some of the threads off unless it's touching the tube. In that case space the RTT bolting bars to get it a tad higher.

 

That's probably for a power antenna or amplified antenna which you probably don't have. Car audio 101 as far as aftermarket goes blue is amplified/power antenna blue with shite stripe remote turn on for your amps don't get the 2 mixed up or you won't be happy.

 

Mornin folks

 

Mernin

 

Field trip Friday @BravesTaco95 @FadedComa headed to AOAA for the weekend!!!