96 Tacoma Drivers door Dome light problem

Hi, I m chasing a drivers side door dome light issue. Its stopping my command start from working.
1st the door. The door switch is fine, dome light/fuse is fine as passenger door turns on dome light and dome light switch to On turns on the light. Drivers side door doesn't turn on the light.

Trucks a standard tranny so for the command start to work it needs to get a drivers door open close as the last arming point when you exit the vehicle and shut off the truck with the remote.

With the dome light circuit not working for the drivers door the command start doesn't get the final switch to arm. Command start works if I exit out the passenger door.

I am thinking it is the Integration relay possibly? I read somewhere the passenger door switch doesn't go through the relay. The Drivers door switch does.

 

Lucked out. Corroded electrical connection at connector of door switch. Works fine now.