2TR-FE Intake manifold spacer kit! Sold out!

fixed it was the manifolds for the catch can bypassed all that and it idled normal .

 

the bracket was a little off . but made it work. as you can see. ended up using 3/8 gates hose for the plastic manifold and just stretched it . 1/2 was a little lose and would not work on the valve cover nipple. it was a 2-3 ft piece and just bypassed the stock metal pipe . used 5/8 piece of gates hose for the other hose. 1ft on top one valve cover to intake pipe.

 

Nice! good fix.

 

Yes, looks good! The bracket turn out ok? Any tweaking? I received the 1" stock the other day but I haven't had time to tinker yet.

 

No tweaking. Just tapped it on the edge instead of center. Should had made the thicker longer (lower). It works for now.

 

Anyone looking for the LCE Header, have one for sale right here.

 

put me on the list for a spacer please.

 

Are you still making these? Any long term adopters have final thoughts?

 

Yes, I do have them available. Let me know if you'd like to make a purchase or have any questions. Thanks.

 

I’m interested

 

Still making these? I'd be interested in purchasing one later this month

 

Yes, they are still available. Just let me know when you're ready. Thanks.

 

You can put me down as interested! Does it have any instructions or is it just the part?

edit: I read back in the thread and saw that instructions are included...

 

@iofs here is info on the hose, along with a good solution for the bottom 2 holes if you haven't seen it yet. I included some extruded flat stock your kit also for this option.

 

Still available?

 

Same question!!
Also a little concerned about the fitment issues some members had. Do we still need to find an aftermarket hose and I like the idea of the bracket underneath the manifold. I’m not a big fan and leaving it just supported by the stud but I’m not exactly a pro mechanic.

 

Hi. Yes, the kits are still available for purchase. And yes, you will still need to get 2 longer hoses, and have to come up with some sort of support. Not rocket science by any means, but you will have to make something. I do include some all thread and aluminum flat stock to help aid in making a support (like the one posted here by another member). If you have any more questions, let me know! Thanks!

 

Ohh ok so it comes with an aluminum spacer/adapter like the one Billy pictured.. that’s great!
Which 2 hoses exactly need to be lengthened? I think I saw that is said 1 hose for the cold air intake.
Lastly, how does the cold air intake need to be modified? I read about having to lengthen it & I believe someone said even chopping the tube and adding a 2” rubber extension.

is there any other mode required to make this function?
Sorry I tried to read the through and understand as much as I could myself.
Thanks!

 

Yep, that's correct. I will supply the extruded aluminum also. It depends, do you have a stock intake, or an aftermarket intake? One of the hoses is from the valve cover, the other is from the I take manifold itself. Other than cutting some of the wire loom tape to get a little extra wire, that's it.