Best Way to Clean Off "Paint Swap"??

Hi All,

I recently had an instance where my rear wheel flare/arch scraped up against the side of a yellow painted pole. It didn't do any significant damage, but unfortunately some of the yellow paint swapped off. I am trying to figure out the best way to fix this, as the truck is otherwise free of marks and I'd like to keep the clean white look.

I was thinking Mr. Clean Magic Eraser but I don't know if that's the best plan of attack? Are there any other methods that work well for this in your folks' experience? Thanks in advance!

Couple photos to show:





Cheers,
John

 

rubbing compound or a polish should work.

 

just make sure you wax the area after... they will strip the wax in the areas that you rub

 

I’ve had good success using a clay bar to remove paint transfer.

 

Clay bar and a dual action polisher with some finish polish.

If you don’t have a polisher use a microfiber applicator pad and some Scratch X.

DO NOT use a cutting compound.
You go least abraisive method first.
People who keep reccomending a highly abraisive compound first have some karma coming back to them...

 

How dare that pole pull out in front of you like that

 

Toluene

 

Amen!!! I figured an angle grinder with wire brush would be the best place to start.