G2 Tonneau Cover and Bed Rack for DCSB (5' bed) for sale

*Update - Prices Reduced, would like to get these out of the garage before winter*

I am selling my tonneau cover and bed rack, willing to sell separately or together. Local pickup in Flagstaff, Arizona or can deliver to Phoenix as well. Fits a second gen 5' bed (may fit other configs, but I haven't dug into it)

Bakflip G2 has some dings on the top, but everything works and it's in good shape, seals well. About 3 years old, on my truck most of that time. All hardware is included. - $250

Custom Bed Rack - $250
The bed rack was custom welded at Artisan Metal Works here in Flagstaff. I had it specifically designed so that it fits with the G2 tonneau cover under it. The mounting points to the bed rails line up with the mounting points on the cover, so you use those bolts to hold everything in place. The bars on it are the same diameter as the Yakima rack cross bars, so pretty much any standard rack accessories by most major companies will work with them.

Bars are slightly higher than the cab so that you can put a box/tray on it overhanging the cab and it will clear it by a couple inches.

I have a mounting plate that I made to hold a single rotopax that is included (rotopax and universal mount not included). There are holes drilled in the cross bars on the rack to hold a shovel and axe with a couple quickfists on one side, and the rotopax and some recovery boards on the other side. I've mounted all kinds of stuff to it over the years including bikes, boxes, ski racks, ham radio antenna, hi-lift, and even my son's strider bike.

Rack is powdercoated black.

Local pickup or I can drive to phoenix if somebody from further south than Flagstaff is interested in them. Would probably negotiate down a bit from saking prices if you could come pick them up.

 

Man that’s sick. Been wanting to have bed bars on top of my g2 but thought it wasn’t possible. GLWS free bump!

 

yeah, I just had them space the base of the bars out far enough that they clear, and the brackets are the same thickness as the washers that come with the G2 for mounting, so they just replace them. Took some head scratching when we designed it, but it works well. Finally just pulled the trigger on a cap instead, so it goes.

 

Another reason why I should get a shortbed..

 

Bump, still available.

 

Hey is the bed cover still available

 

Yup. But I'm out of town for a couple weeks, can give you a shout when I'm back if youre interested. Where are you located?

 

Ok sounds good I’m from flagstaff too

 

Her is my number 928-600-8863. just shoot me a text when u get back

 

Bump, still available, reduced prices to $250 apiece, would like to get these out of the garage before winter.

 

Is this still available let me know shoot me a text again.