1st Gen Lunchtable Thread - General Discussion

Oh lead makes it easy because it melts quick.

Im use to using silver. Though sears like to use mainly copper

 

Good guys? You took them and a handy?

 

Not the prettiest thing ever but I couldn't find any bubbles when I tested it with some light pressure.

 

Lol nah I wasn’t a good guys. Tyler was.

And nah non of that at work

 

These horns come out of GM malaise years cars so even in ND and SD not many yards have 70's and 80's or even 90's Caddys. They got to crush that shit out so new shit can be brought in. The yard down in my town one would be lucky to find a GM vehicle from the 90's. The idea of Pick n Pull doesn't exist here.

 

You patching holes on a gas line?

 

Same story out east. Yards fill up quick and no one wants parts off old stuff.

 

I think northwest Indiana is a bit of a detour from going to
NC. But I support this

 

No, I'd just make a new one if it was for gas, they're specially curved vacuum lines for routing around the intake manifold and I was removing two from the set that I won't be using and when pulling the others off, the spot weld ripped the side of this line. These will only see air.

 

spacers, blocks and drop brackets won't ever see any love on this forum lol.

 

Wat?

 

Ah okey, i was about to say, dont use that for gas, it will just pit the inside and eat a hole.

But its what ever on vacuum lines like that. Though i would of patched the hole differently

 

A one ince body lift is okay for the body but will rip holes in the bed supports. Anything over one inch requires burning the owner at the stake and selling the truck to someone who cares about it

 

Just curious, cause I can always use a new technique, how would you have patched it?

 

Dibs on @Crow_of_judgement truck after you guys burn him

 

ya I'd only consider a 1" to help me clear my 33s better but I'm going to try more trimming first. Rubbing the frame though makes me think I might need some small wheel spacers, rubs on full turns when it stuffs offroad.

get 33s they said, it'll be fun they said...

 

No I got dibs

 

It literally took me 15mins to mount mine, hit the pinch weld a couple times an now nothing scrubs. Even when I jumped it ate the top of the fender not the cab corner.

 

Damn, it's cold and smokey out.... and almost bought a 97 4runner with blown headgasket for 550.00. Could convert my truck. But wife say not now. Buy a running one in a few months..