Leaf Spring Bushing Sleeve

Hello,
I did a bonehead move when removing the bushing from my Old Man Emu leaf spring. When removing the old bushing I also removed (and destroyed) the sleeve that the bushing slides into. Does anyone have a source for a replacement sleeve?
Thanks!!

 

Welcome to TW. Lucky for you it’s not an expensive fix. Just make sure to grease the shit out of the bushings before inserting them into the sleeves.

https://www.headstrongoffroad.com/store/p513/Full_leaf_pack_bushing_kit.html

Or

 

Oops just realized that you have an ‘01. Just navigate to the 1st gen section of each vendor’s site to purchase the correct kit. But be careful, you may end up buying more than you went in for.

 

MRT . . . Thanks for the information! I still have a question. I presently have the Old Man Emu bushings but it is the outer sleeve that I am missing. If I push the bushing into the spring there is a space between the bushing and spring. That is, the sleeve between the bushing and the spring itself. Does that make sense? If you look at my picture you can see where the sleeve was.

 

Oh my bad, I completely overlooked that part. I'd contact ARB directly and have them send you replacement sleeves. Make sure you give them the correct part # for your specific leaf pack.