What Have You Done To Your 3rd Gen Today?

Start by going through the grommet.. I found this within 2 seconds of googling "2016 tacoma ditch lights". Think it's pretty straight forward this is the one I used to reference switch colors.
https://youtu.be/QJ3Nt5EmkS0

 

Guess I'm looking for a bit more detail on 1) Getting through the firewall 2) fishing it through the inner dash area.

In the vid he mentions using a straight wire to push through, but it ends there in terms of actually showing anything else about getting the wire to the switch.

'Preciate it anyway!

 

Lol. Yep! Tractor supply. About 60 lbs. I think the site claims 100.

 

How's the road noise with this light installed?

 

Beast! Yep, all you need now is a little pastidip! Awesome looking rig!

 

I mean it's pretty simple dude. Wire through grommet. Push it through, feed it through, pull the rubber from the side what ever you have to call it to get the long wire through without damaging other wires...Again the helpful video I linked was found in about 2 seconds, perhaps digging deeper with Google would provide what you're missing Although you'll probably find the exact same description. You fish it through... here's another video hope it helps. Where exactly is the switch you're trying to reach?

https://youtu.be/jtNwfU9j9_w

 

Oh but there is! @rrentrop sells a great black out dash kit that is super easy to install. It even comes with a few extras in case you mess up.

https://www.tacomaworld.com/threads/blacked-out-dash-chrome.528820/

Also see his eBay store:
https://www.ebay.com/ulk/itm/183072070656
Bundle products and save on shipping.

 

That Voodoo Blue color is really growing on me

 

added a bed mat, put a bed rail on my tail gate then mounted shovel and traction boards. not the prettiest right now but it works

 

And replacements are always free in the event you need more!

 

Of course there is... lol

I'm ordering them after Thanksgiving. Thank you for the awesome link!!

 

Do you make any center cap stickers for sport wheels?

 

I guess that's where most of question was - if it's a portion of the firewall I can directly push through or if anything needed to be removed before hand. Switch is on the same panel as the cargo light and bed outlet; low and to the left of the steering wheel.

 

Added some dual colored switchback bulbs for the fogs and added Hondo Garage phone mount this week

 

Got these on ebay

 

Gotcha, so you'll be using the drivers side grommet. Its pretty tight I'll give you that. I was able to get mine through without a wire feeder. I worked from the engine bay with my fingers until I was able to wedge some wire through the grommet. From that point I removed the plastic under the steering wheel 2x phillip screws and a good yank. Then I laid on my back with my head towards the pedals in the foot well. I had a third pedal to work around so it was an awkward pull but I was able to reach around the third pedal and grab the tiny bit of wire I had pushed through from the other side. From there carefully pull the wire through. Should be easier with an AT and only 2 pedals. From there look up how to access the switches below the cubby.

 

Supra!

 

That's actually creative and I like it.

 

How sturdy are they? Do you think both together would hold 50 lbs?

 

They seem very sturdy. They could easily hold a hi-lift jack. The metal is folded at the bottom in towards the bed sides. The folded side sits down on the lip that is inline with the fender well