WTT - TRD Beadlock Rims - Graphite for Black

I mean the SCS wheels will rub. The offset is really aggressive. I had them for a bit and wasn’t comfortable hammering everything away to fit 33” tires.

 

Ahh. That’s why you need these OEMs. It’s a good balanced offset. I love them, but just want to change color.

 

I’ll reach out to vin and see. If I keep them I’ll run a 275/70 17. That should minimize the trimming.

 

Are you running the Pelfrybuilt front bumper? I was debating between that and the CBI

 

Yeah I got the @Pelfreybilt. Its got a great design and their customer support is fantastic.

 

I had one on my first 2nd gen satin is awesome. They are great.

 

Confused why you let that go.

 

I've got one black that I'll trade ya!

 

Geometry is different on 2nd and 3rd Gens. The suspension parts can be swapped between the different generations but it will provide different amounts of lift on each.

You can accomplish the same amount of lift, but you have to get 3rd gen specific parts to do that.

 

I did look into that. What I’m finding is that the 3rd gen is 1” taller out of the box so I should expect my lift to be roughly an 1” shorter then my 2nd gen. The part numbers for Fox and King are the same between both 2nd and 3rd gen. I’ll have to dig a little deeper to see if they offer something more specific that I am not seeing. Thank you for the insight though much appreciated.

 

Approximately 1” difference yes, but not always exactly. And no problem!

 

FYI looks better without the vanity ring. I just got set screw to fill up the holes

 

Bump

 

I can't trade you the black ones but I'd give you the $ to buy thEm. I can't find a dealer who will sell me the graphite without a Baja VIN.