Clazzio Seat warmer switches

Hey guys,

I'm going to be ordering some Clazzio seat covers along with seat warmers to put in my 18 Tacoma TRD Sport w/ Tech package. I'm wondering where other people have put the switches. On Clazzio's website they have the 2016+ Toyota Heat that says "Switch Fits 2016+ Toyota Vehicles" but can't find out if they are the big or little switches. Does anyone have these know what size or have suggestions on where to put them?

Thanks for the help,
Sean

 

Check out the first page of the 3rd gen list. Someone just did an install with the switches. If there not the same there either. A small 1/2 circle switch. Most commonly used for aftermarket or a 1x2 box

 

The wheel switches are smalls.

 

I was thinking about getting them also when I get clazzio's. They are the small switches like oconnor said. They will fit in the center console area under the dash so I was thinking about pulling the QI & the parking sonar switches since I never use them anyways.

I did see these on Ebay that would only take one spot

 

Clazzio has a two dial switch as well on their site so I may go that route as well and just replace the Qi switch. All that thing does is make my phone really hot and not even charge my it.

 

I have these seat heaters with the hi/off/lo switch. I put the switch on the plastic part of of the seat base. If you are in the drives seat you reach down between the seat and door with your left hand. They are not noticeable and easily reachable. They were in this spot on my old F250 and figured would work out good there in this truck too. Also cuts down on the amount of wiring you have to run.

Basically on both seats in the area circled.