What Have You Done To Your 3rd Gen Today?

Any chance you could share a link to the Shape Ways mount? Can't seem to find it...

Thanks!

 

https://www.shapeways.com/product/PJSDBHAWB/gopro-clip-to-rexing-dashcam-mount-best-way

Keep in mind this is only for the v1 and v1p

 

Understood. Thank you!

 

Sorry no install pics but it was fairly easy.

 

BOO!! Are you getting an ARE specifically? I had a lot of trouble with determining when exactly it was going to arrive - the local shop I went to could not seem to get a good ETA and I needed to plan around work, holiday etc for the install - the local shop claimed repeatedly it was communication with ARE. I did not have this problem when I ordered one back in May (but it was in TN, and on a truck that got totalled in July), so I was really surprised. They claimed it was a problem with the western regional distribution - just wanted to forewarn you to manage your expectations for arrival date. Quality seems great - we'll see when I get it out in the field.

 

Oh sure, spending more Doe

Received the new TW 2019 Calendar today.
Finished the clazzio seat cover install and did the back section.
Also added more Meso accessories: Dome light, map lights and Gasshole.
Installed @G Tek Fab Front and rear Door Sill Protectors and TRD Push start Switch.
Waiting on Color Matched Bumbershellz for the rear Bumper End Caps.

 

Hey guys EBay has a 15% coupon! Hurry up it ends in a few hours!

 

Installed the Smittybilt Winch I got for Christmas, what a pain in the dick. Also installed a H7 AGM battery with new terminals and ran a Disconnect for the winch.

 

Busy, busy! What kill switch is that you ran with?

 

Thanks for sharing that.

 

Put a couple of my patches on the headliner and changed the off screen on the deck.
Still waiting on a bunch of parts and the post office. And a bunch of Toyota patches on the way too so I'm saving some room for them before my other 50 some odd patches get put in.

 

Mcneils 3" inch bulged fenders installed , now waiting for my LT kit to arrive

 

down with the thickness!

 

I believe the SSO bumper weighs about 75 lbs but NET weight added is only about 50 lbs since you discard some OEM parts during installation process. (A winch will add about another 70-75 lbs depending on winch). The only cutting required is where you cut out the lower plastic fascia/bumper. I used a Dremel wheel and it took 5 minutes to cut the plastic. Very doable project for any experienced DIYer.

Did not notice any measurable "droop" of the front end although I have an aftermarket 3" lift with Fox coilovers so I adjusted the front coilovers to increase 1/4" last month in preparation for added 150 lbs.

 

Nope not at all. Sensor/Cruz control working good without issues since install.

 

Before and after pic

 

Looks like a double tooth infection...
or a hamster that found nuts.

 

For my birthday, my fam bought me some SCS F5s in Bronze! I've been wanting these wheels since I got the truck. Finally going to have them in a week or two!

 

Thanks brother.
Finally able to pull the trigger on the TRD skidplate.

 

Thanks! Just used it.