Audio Connectors

Installing a 920BT in 2010 Tacoma Access Cab. I've pulled together most of the parts and will start the install in a few days. I managed to get the 2010 audio wiring diagrams and will hopefully be able to wire into the existing sub and get it to work. I'll put together a post with pictures to share when I'm finished.

One question - does anyone know where I can find the mating connector to the 20-pin connector (toyota calls this "R3") that plugs into the stock radio. I'd like to make a wiring harness to pickup the steering wheel switches, speed control, etc. signals rather than using those clips that pierce the insulation to make contact. It's probably some kind of Molex connector, but would sure help to know which one and where to buy.

Thanks,

Steve

 

bump

 

When I did mine i just got the wiring adapter from Crutchfield and soldered the connections to the new units harness. Then it just plugs right in.
http://www.crutchfield.com/p_120701761/Receiver-Wire-Harness.html?tp=2977