Best UCAs for my setup??

No, just needs to be relocated. It's a very small bracket that moves it forward.

 

This.

 

Oh okay perfect. Thanks.

Are the body rolls that unsafe without a sway bar on the road?

 

You will find that many have removed it and love it. Some have removed it and reinstalled it. All depends on how you drive and where. I tow a small travel trailer and left mine on, just did the HD links. Love it. It will have more roll and articulation with it off. Take it off and test it. Not that hard.

 

You could also take it off and run a stiffer spring. I am running a 650#.

 

It's a simple removal right? Just gotta take the skid off?

 

Remove the skid, links, and 4 bolts. About 30 minutes.

 

Normally i stick to the second gen threads but since the suspension is almost identical i figured i would wonder into here, but has toyota still not fixed the front diff needle bearing issue?

 

No they have not fixed it and probably won't. I got almost 40K on the stock needle bearing. Lifted my truck full 3" with only 300 miles on it. No problems yet.

 

Still have to replace it if you get the cobblestone brake/accelerate vibes thru 20mph/40mph (was for me)

 

Stuff wears out quicker the higher you go.

 

Is it only if it goes away in 4hi? I have all kinds of little vibes but still stays the same in 4hi. Some days it's better than other though. Lol

 

No, wasn’t present in 4wd, and if it was it was very faint

 

Wait. No I mean does the needle bearing vibe have to go away in 4wd? Like if I have minor vibes and they don't go away in 4wd that rules out the needle bearing as being the cause?