1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2016 SR5 DRL/Parking light

Discussion in '3rd Gen. Tacomas (2016-2023)' started by Medic 1, Jan 15, 2019.

  1. Jan 15, 2019 at 4:50 PM
    #1
    Medic 1

    Medic 1 [OP] Member

    Joined:
    Feb 20, 2017
    Member:
    #211149
    Messages:
    5
    Gender:
    Male
    Georgia
    Vehicle:
    2016 DCSB SR5 Silver
    Rough country 3” spacer lift, VTX rogue 17’s black, 285/70-17 BFG Ko2, TRD pro grill with runnin4tacos grill lights “3”, rigid ditch pods with cbi brackets. Rough country 30” light bar behind lower grill with Rago brackets, rigid flush SRM in rear bumper, Cali raised 3 switch panel with switches, kicker speakers all around, prinsue rack, Morimoto fogs.
    I have a 2016 SR5, recently installed raptor grill lights and when I hooked in to my fuse box via add a fuse. I turned the lights on and heard a pop. I put the add a fuse into the slot that controls the headlights. So when my headlights are on the grill lights are on.
    The problem now is that when I go through the selections my DRL/parking lights come on all the way until I turn my headlights on. At that point only my passenger side light DRL/parking light works. not the driver. Both turn signals work fine though all the selections. I have checked all the fuses under the hood and can’t figure out why this is happening.
    I know this is a long post, I wanted to give detailed info any help would be greatly appreciated.
     
    Last edited: Jan 15, 2019

Products Discussed in

To Top