Custom Billet Shift Knob for Toyota Tacoma (2-1/4" diameter). ***Utilizes factory boot.***

Was wondering how many here have the URD short shift kit underneath these Knobs?

 

I would like one and the price is in the ballpark, but there has been no real consensus on the quality. I've seen posts going in both directions at different times.

I do know that @7r41lbr34k3r has mentioned the possibility of investigating the potential of maybe producing a SS kit. In @TeecoTaco Ti, of course.

 

I have one. Very nice operation. Short throw, aided by the weight of the Delrin Hybrid. The assembly of the short throw set up is quite the PIA. But worth it in the end IMO.
As tricky as the assembly to the shifter rod assembly was, the worst part for me was after installation. I forgot to reconnect the breather tube and had to lay under the truck and reach up around and try to connect it blind. finally ended up pulling the console back out and getting a helper to catch the tube while I passed it up from underneath the vehicle. best to hook it up before you reinstall the shifter

 

I will admit to using a soft jawed vice and a 5 pound dead blow hammer.

 

Okay, I am not activating any new orders until I can ship a few out. BUT ... I developed an order form if anyone wants to help me out so I can work out the bugs before going live with it. Anyone on the waitlist is preferred, but I'll send it to anyone really.

PM or email me for the link.

 

I also have the URD Short shifter, I love it. Install wasn't too bad, although I do have a 2nd gen, if that matters. Took me a few hours but definitely worth the money. Makes driving around town and stop and go traffic alot easier.

 

Monday Again!

 

I’ll take one of these, I don’t need the TRD engraving on collar.

I’m local in Hatfield, PA I can pickup if needed.

Really don’t like filling out forms, so just “pencil” me in if you can, thanks.

 

It's my turn it's my turn money's burning a hole in my pocket. lol

 

All done!

Oops, one is upside down.

 

I am 5 deep in working through my 19 long waitlist, but I'll get to you.

 

Awesome

 

Ok thanks

PM I can pay in Cash, CC, PayPal, Bitcoin, Precious Metals (only Ag at the moment) and Chickens

 

Yay, eta on shipping?

 

I plan to send the back row on weds, and front row on Friday.

Still a bunch of polishing and cleaning to do.

 

I am on the list hopefully...

 

You are. I sent out 6 order requests, and will wait 48 hrs for deposits before moving to the next in line. It will probably take a week to get through all of it, and if the past has taught me anything many of them will drop off. You are in the #9 spot.

With the order form pretty well established now, I will figure out a better way to do this going forward.

 

Thank you!

 

First 5 spots of the next batch filled. I also updated the first post with a lot of the new order form content, should hopefully clear up a lot of common misconceptions(and probably create a few more, ha).

Once the waitlist is gone through, that will be the official end of that. I just don't have the ability to chat with 10 new people while still in contact with all of the outgoing batch. My head is seriously spinning over here right now.

Next time I am ready for orders I will drop the form link and let it fill up on its own.

Filling out the form is not required, but it surely is preferred. Once I have enough pictures of preconfigured options, you can just send me the picture and I can work from that.

@awdool1129 , I wouldn't mind a better shot of yours to put on the front page.

I neeeeed pics, so everyone feel free to post em up.

 

Man, I love me some coconut porter! Have you tried Avery's coconut porter? Comes in a bomber.. it is delicious.