What Have You Done To Your 3rd Gen Today?

Today, finally blacked out emblems!

Waiting for Pro Grill and light bar I ordered to finish Blackout!

Also ordered Teraflex Falcon Suspension, Bedrug liner, and some lighting. excited to move forward with getting ready for summer! Fishing!

Have not decided on wheels/Tires, but soon, think I will get suspension installed first and move on wheels from there.

 

Thanks! It’s the 14” with MX4 brackets.

 

Made a removable storage bin. Made out of pvc wood stuff. Both side bins still accessible. Light enough to easily remove when needed. Keeps small items from rolling all over the bed. Works great holding grocery bags also.



Added under rail lights and a switch. Switch is on the right by the tailgate lock mechanism


With the bottom grating installed. This helps keep stuff dry when water gets in the bed. D-Rings still issuable.




Also replaced the 4” pvc piece closest to the tailgate with 2” pvc. Made it easier to get grocery bags in and out.

 

I just bought

$29 ESI Super Cap Seal 20 FT (1 1/2" Width x 1/2" Height x 20' Length) EPDM Rubber for Caps 200 lbs or less

this off of Amazon, it was recommended on another thread. Hope it helps!

 

The picture didn’t make it clear you have a topper. My last truck had one for 6 years and never had that issue. That being said I could see a couple solutions; pipe insulation foam placed between the topper and truck cab or a seal between the cab and topper. Thought about it in the past but never had the need.

$24 Trailfx Trail FX 20000 Truck Boot

https://www.amazon.com/Trail-FX-200...MGYVC5559Y0&psc=1&refRID=3DTXQAT97MGYVC5559Y0

 

Did the headlight lenses come off easy?

 

Careful with the dash cam/masturbation station combo you got going on there! Lotion.. napkins.. and bandaids for chaffing! At least you’re prepared for getting stuck on a solo run!

 

You have a link for those? I don't think the badge on Weathertech and Husky Liners are the same size. May pop on a set of those.

Disregard.... I found the site.

 

That’s a great Idea! I am starting to plan for drawers in mine. Always great ideas on here!

 

Exhaust chop

 

how does it sound.

 

Plasti Dip or Overlay? I'm guessing Plasti...?

 

No, it was pretty difficult. Definitely took patients

 

Got new tires yesterday and did an oil change today. I love how aggressive the wildpeaks look.

 

Sweet I just put mine in the other day too! Old dash cam died.

 

Sometimes it's the little (and free!) things... I've had the DMM for 2 months or so and my OCD kicks in every time I get in the truck and see the power cord dangling, so I decided to route it through the console and out the top of the trim piece. I unplugged the stock USB plug and tucked it back behind the radio and plugged in the lightning cable, then used a Dremel to cut a little hole in between the trim and the dashboard to fit the cable into:

 

Holy smokes...295's?? Good luck. I spent almost a year after lifting triming and cutting to get the rubbing to stop with 285's and spacers.

 

I’m picking me up a set of the weathertech badge replacements right now. Nice find!

 

There was a two week lead time, but I got a tracking number about a week or so after ordering. Make sure you order the black nylon, they will be stronger.