OBD Fusion app

What OBD port reader is best to use with the OBD Fusion app? Im curious if the more expensive models are needed that support MS-CAN.

 

I use Torque Pro (Android) and a cheap 12 dollar adapter from Amazon. It shows everything I need including trans temp.
The one I have needs to unplugged if left for a day or so without driving, but they do make some that has a button or switch you can easily turn off.
Sorry, not OBD fusion specific, but both programs work the same.

 

Yikes! I was not aware of that. Which one do you have? I've been leaving my VeePeak plugged in, and haven't used the truck for a week . . .

EDIT: I just read the instructions... VeePeak shoould be removed when not in use. Luckily my truck did start up anyway

 

As it happens, you can get one for $30 in the next 15 minutes: https://www.tacomaworld.com/threads...r-available-until-0900-pst-on-1-26-19.589685/

And it's a good one.

 

I dont even know if it has a name. It was a cheap one from Amazon that I got when I had my dakota. I needed something quick and cheap to check some things out on it and it worked as I needed it to.
I havent really tested how long I can leave it plugged in, but I do know the lights stay on the adapter even when the truck is off. I also have a dash cam running constant power in park mode, and when I dont use my truck its usually days at a time, so I will just undo it to be safe.

 

$19.98 if you use the coupon code in the other thread. But only about 2 minutes left . . .