1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Blower stopped working

Discussion in 'Technical Chat' started by Covington, Jan 28, 2019.

  1. Jan 28, 2019 at 9:11 AM
    #1
    Covington

    Covington [OP] Active Member

    Joined:
    Jul 15, 2009
    Member:
    #19694
    Messages:
    41
    Gender:
    Male
    Central Florida
    Vehicle:
    08 PreRunner V6
    2008 Tacoma SR5 Pre Runner. The blower stopped working in all modes. I can hear something weakly spinning when I turn it on but no air comes from any vents. What fuses should I check? What else can I look for? :confused:
     
  2. Jan 29, 2019 at 12:55 AM
    #2
    Wyoming09

    Wyoming09 Well-Known Member

    Joined:
    Apr 24, 2015
    Member:
    #153833
    Messages:
    14,277
    Gender:
    Male
    New Tripoli Pa
    Vehicle:
    2000 Work truck 5 speed 4x4 3.4
    Super Springs
    First Thing is unplug the Blower motor check if you have voltage when it is turned on
     
    Boghog1 likes this.
  3. Jan 29, 2019 at 1:08 AM
    #3
    Asianguywithatruk

    Asianguywithatruk Well-Known Member

    Joined:
    Jan 18, 2013
    Member:
    #95517
    Messages:
    616
    Gender:
    Male
    CenCal
    Vehicle:
    05 taco DCSB
    King RR coilovers Ironman leaf springs 17" scs sr8 jet black 285 75 17 Yokohama geolandar Demello front bumper Brute force rear bumper
    I hit the blower and it’ll start working again.
     
  4. Feb 1, 2019 at 4:15 AM
    #4
    joeyv141

    joeyv141 Well-Known Member

    Joined:
    Jan 31, 2016
    Member:
    #176710
    Messages:
    1,881
    Gender:
    Male
    New Jersey
    Vehicle:
    08 DCLB 4x4 V6 TRD Sport
    First hit the bottom, if it starts right up then put a new blower in it, if that doesn't work unplug a,d check for 12v at the connector, if you have 12v out a new blower in, if no 12v then check the blower resister, from your description though I would assume you need a blower motor. I have had luck with both napa and murphy blower motors.
     
    Boghog1 likes this.

Products Discussed in

To Top