lifting shocks

Are there any shocks that will lift the truck that fit the 5 lugs?

 

https://www.tacomaworld.com/threads...-lifted-lowerd-guide-and-general-info.548413/

You should be able to just use shocks from a trd 6lug. Or some 5100 from a 6lug

 

I don’t know a lot about 5 lugs, but shocks themselves won’t lift the front end. UNLESS you use Bilstein 5100’s. And what makes those shocks lift the truck is a perch that compresses the front coil spring tighter than normal. So maybe stiffer springs or 5100’s? Did you already search for a 5 lug lift thread?

 

Oh i read that wrong. Sorry im tired. I was thinking he was asking for shocks that will fit a already lifted 5 lug. In the rear after a aal you can use 6lug shocks. Up front your only option is a spacer lift

 

Here both these threads are good info for lift options
https://www.tacomaworld.com/threads...-lifted-lowerd-guide-and-general-info.548413/
https://www.tacomaworld.com/threads/the-lifting-your-5-lug-guide.518620/page-6#post-17961350

 

I believe icon back in the day use to make lifted coil overs but they no longer do so you are stuck with the oem ones and spacers.

Unless you go LT up front then you can options but thats lots of $$$

 

I think icon still makes that cilover, the problem is total chaos no longer makes the uca needed to run it. Someone correct me if im wrong

 

The few 5lug guys i talked to said irs discontinued, and any place you find them they are out of stock and just forgot to remove it from there website

 

Bummer.

 

Granted i could be wrong, I never did any research into them

 

I'll email icon and see what they say.

 

Just had an icon stage 1 kit installed. 2.0 coil overs, new icon uca delta tubular, 2.0 rear shocks, 3 leaf spring packs.

 

This is a 5lug thread