What Have You Done To Your 2nd Gen Tacoma Today?

Yea, I'm currently saving for a destination wedding and European Ski honeymoon later this year, plus always saving for truck mods and new gear. I have such expensive hobbies (1st world problems ¯\_(ツ)_/¯ ) So I have to go the cheap route sometimes...

What bulbs/reflectors are those? They look good, and I like the sharper cutoff on them.

 

Compared to an older 2nd gen height.

 

Changed out the gear oil with 60K miles on the clock... the rear diff plug had a few specs of debris adhered to it and the oil wasn't all the bad (dark but no water evident/no burnt smell). Transfer case gear oil looked like new and the front diff gear oil was similar to the rear. A few squirts of Liquid Wrench a few days ago on the fittings, a 6 PT 24mm socket, a T55 star bit and new washers made the job go very quickly.
I went with AMSOIL's "Easy Pak" in 75w90 for the 3 diffs. No pump needed as the "EasyPak" container is a like a kid's squeezable juice box.
No fuss, no muss, no spills, no waste AND NO MESS!!! Total job took including "clean up and put away" took about 1.25hrs.

 

Cant relate lol

 

Mines in the exhaust I think. Started after our snow storm. Same with the excessive heat sheild rattle

 

I think mine is the sound deadening in a place where it doesnt need to be

 

I have the same ones. They work pretty well, and I like the look as well. I did have the passenger one die after about a week or two, but they replaced it immediately with no problems.

 

I didn't think LEDs were a problem with the reflectors. I thought it was HIDs that were the problem

 

I read this thread It's taking about headlight reflectors, but I figured the concept is the same in the fog light reflectors. I might be wrong though, its been known to happen occasionally

 

BHLM

 

How did you accomplish this? Tap into a wire after the dimmer switch? Where did you find it?

This is something I need to on my truck for my gauges.

 

I tapped into the OEM fog harness and wired up to my Spod switches. If you need help let me know and I can draw up a wire diagram for ya

 

Just out of curiousity BHLM is an acronym for what?

 

Baked HeadLight Mod

 

Black Head Light Mod

 

Ah ok I always thought Black Head Lights Matter but wasn’t sure

 

Took off stock running boards.

Before:


After:

 

Stock

 

see @DarthPow’s response

No.

Correct!

Its actually Black Rifles Matter...

But that changes the subject entirely lol