Bilstein 5100 Lift

Do you got any hub to fender measurements?

 

That's what I got with factory coils and 265/70/17 and rides the same as my neighbors dclb with 888s. I personally don't see a difference in the ride and he is running Nittos v/s me having Toyo s.

 

Are you on 5100 and factory coils? What setting? Gotta compare when they are set at 3rd or top notch. Most just repeat what they hear off the forumns, but i found the 888s gave a softer ride over all

 

Here’s 3rd notch and stock rear end. Just switched up my setup this last week.

 

Yep, 5100s on factory coils, 4th perch and rides softer than my Sport suspension did. 265/70/17 Toyo open country at2 SL on some TRD pro Sema wheels, ecgs clamshell bushing and a 1/4 spacer for the lean with a one inch block in the rear. Rides like my neighbors who just recently did 5100s on 888 coils with a block and they look almost the same in height. We both see no difference in the ride. However people do believe what they read.

 

Trucks look sick!!!

 

Nice matching rims, that was my second choice but went witj matte grey ray 10s. Gotta get rid of the remaining chrome tho

 

Thought about it, then I either got to black them out, overlays or replace with new ones or debadge all together. Then I got to do black lugs and exhaust tip or paint the whole exhaust. I do like the TRD sport badges that look like the pro emblems and then do the black emblems on the tailgate and last remove the TRD stickers. I like a little chrome being a few hints of it here and there. I'm getting ready to install my all black Clazzios and heated seats. I'm also adding rear heated seats as well.

 

You can plstidip the emblems...easy, cheap, and removable. You can spray vhy nightshade on the side mirror signals....again cheap and removable And the hardest will be the headlight mod. Dont mind me, i like posting pics of my truck lol

 

Sweet. Do your tires rub because of the offset you have? or since those are 265s, it clears?

 

No rubbing at all and they actually cleared just fine stock without any rubbing as well. No mud flaps. 16x8 0 offset with 265 75 16 tires

 

Take a look at the Remote X on Amazon, I paid $159.99, I think went up to $179.99 now. It was a simple ½ hour install and works perfectly through the remote on push start Tacomas. Extra wires are eliminated and very clean install (Same Fortin unit everyone has). 12V was what I had been looking at and then looked at N2 units for $199.99 and decided to give this one a shot. It just works and I think only issue is if you want to spend the $300.00 to get the cell phone remote start module. It won't work with the Remote X.

 

nice, it looks lifted but stock at the same time if that makes sense. good looking set up

 

I looked into that one. Going to order soon. Thanks for the suggestion.

 

Was hoping to not have any vibrations or issues and so far it seems to be good. Just enough to differentiate it from all the other Tacoma’s in the area.

 

Sitting level on 888 coils with 5100s and Total Chaos UCAs with aal in rear. Rides great. No complaints

 

I think when I last measured it was around 23.5" for the fronts

Definite rake front to back.

 

You look higher than me with same setup

 

5100s on the 4th notch with stock coils and a 2 inch AAL. 285/75/16, only rubs when I turn left in reverse.

 

Don't take my word but I swear I've read that long beds get less lift from the OME coils as compared to short beds. Not sure how true this is, but that could be the reason.