What Have You Done To Your 3rd Gen Today?

I'm not sure I'm completely sold on these. The sound clips I've heard made them sound like a Volkswagen or Kia horn. I kinda like the deeper fuller sound of traditional full-size truck horns.

 

The 2.0 is he power one this one is he 3.0 it was only $250 vs over $599

 

Busy week.......
TRD Pro Gray wheels with BFG 265/70/17. Mad Hornets grille. Tint.

 

Pro grille in. Having trouble with the garnish cover though. Won’t click in.

 

couldn't get mine to click in either.. it's wedged in pretty good that i can't pull it off. should be ok

 

Tonneau name? Leer?

 

I had the same problem with a non-OEM grille. Got a hold of an OEM and it fit like butter.

 

Ordered a BAMF grill today...........

http://bayareametalfab.3dcartstores.com/2016-and-2017-TACOMA-ECO-grille-insert_p_75.html

 

Looks great, love the wheels!

 

Yes, post the pics with them on...

 

19 Limited. Checked my leaf spring bolts, were tight at 52 ft lbs. Checked my rear diff fluid and for diff leaks, fluid full and no leaks. Was going to grease my zerks on the rear driveline, mine do NOT have any grease fittings. My front driveline ujoints had grease fittings, but you could clearly see grease on the fitting and also coming out of the seals, so they were good. Makes me feel better that maybe Toyota is getting a grasp on some of these issues. Will check my tranny fluid soon.

 

Popped out the passenger door speaker to roll my own adapter this week. Decided for < $15 to just order a set instead. Fair bit of moisture inside the panel when I got in there. It rained pretty good here Friday & Saturday and the truck hadn't moved since Friday afternoon so maybe that's normal?

 

Looks awesome...

 

SDHQ sliders, Softopper.

 

Bad night time pic, but just checked the mail...saw this on here a week ago, and had to get one from ToyoDecal on Etsy.

 

One of the best decisions you can make for your baby

 

Finally finished removing my original/stock 2n1 led/fog lights ie harness/switch (will put up fs later).


Wasn’t bad pulling the kick panels and dash as I was thinking.


This is why I hate t-taps- they cut a couple strands of wire. I put some liquid tape over it but would like to fix this (pull terminal cut/add/solder and reinsert). Anyone know what this plug/wire is for (in case I have any connection issues)? Says it’s the ic3 connector pin 8 grey wire. 3rd up from the bottom


Now I need to either get a blank switch to cover the hole or finally decide on a button layout and get a @mesojdm custom panel

 

I modified my Method center caps. Never loved how far the method wheel center caps stuck so far out. I had a 5th cap and some time. What do you guys think? No additional parts required just a saw and dremel.

Sorry for the crap pics it’s snowing like mad.

 

$300-$400+ For that grille?

 

Mine.