Tacos in St. Louis area

So...who wants to run 40's?

https://www.tacomaworld.com/threads...ong-travel-ifs-suspension-system-rclt.591033/

 

You’re part way there getting that bumper money back lol

 

anyone near Forsyth Illinois?

 

Thats gng for gears

 

Jessy is west of you in Springfield.

 

Might as well hold off to do gear till you get 40's...

 

I'm in central MO buth there is a vehicle there I wondered if someone could go eyeball for me.

Someone who knows about Illinois salt and rust lol.

 

I'll make an effort to make it down...as of now, shouldn't be an issue. I know @zdski was hoping to get a quick idea of the 5100's before installing his, so as long as nothing comes up with work, I should be able to make the run!

 

Just curious but anyone here interested in a 02dc trd o/r?

If this one that I want to look at pans out I’m gonna have to sell mine. It’s the one in my avitar. I can post details if interested.

 

#nitroornothing

 

Hit us with the details and pictures as someone here might be keen as it would save them from trying to fit 40’s on a truck they are still making payments on.

 

Post the details

 

Who you talkin’ about?

 

Who am I to stop such a project ....

 

I have a 02 dc trd o/r with 181,xxx. It has no rot in the body or frame. A few dings and scratches as I use it off road and when hunting. It hasn't been wheeled just used.

it has these mods, repairs, upgrades....

new v/c gaskets, plugs, seals, half moons and knock sensors with harness as of about 6 months ago
4runner front seats with seat heaters, still have stock seats too.
fuel filter 6 months old.
new royal purple in both diffs and transfer case. only fluid not new is transmission.
fumoto drain valve
allpro baja front bumper and front skid
all pro sliders with kickout and top plates, welded on. pinch welds have been clearenced.
arb dual air compressor (may keep this)
viper 9500lb winch
no name 24" light bar
scs f5 17" bronze with 255/80/17 stmaxx. (may not stay, if not I have 17" fj steelies with nitto 285-70-17 trail grapplers that have about 4-5/32nds remaining, also have spacers so they fit with out rub)front fender liners have been trimmed for clearence and body pinch weld has been massaged a little for tires
billy 5100's front and rear with ome dakar leafs and ome 882's.
has front diff drop
cv boot slide mod done with new toyota boots and clamps
grey wire mod with elocker anytime
also has 2L/4L mod.
weather tech mats in front
toolbox in bed.
front bumper has trailgear lights for turn signals
aftermarket smoked tail lamps with leds. newer aftermarket headlamps and turns, they are not the best fit or quality, but dont shake and work fine. better than the glazed ones that were in it.
has newer battery, blue sea fuse block is installed in engine compartment
ac works, cruise works.
no check engine light.
gold exterior tan interior
rear sliding window
tinted windows-ceramic tint (just done 2 months ago)
windshield is 6 months old
Clifford 3.3x 2 way remote start and alarm
Factory bumper for front I still have
13wl front brakes (calipers rotors and pads all less than 5 months old, factory brake hose with banjos drilled. Stops like a champ with very good pedal.)
New rear shoes hardware and axle seals
Ebrake lever on backside of drum cleaned of rust and lubed with wheel bearing grease, now it works like it supposed to.
Front doors have dynamat, focal components
Rear doors dynamat and stock speakers
JL 300.4. No sub. Never had one.
Alpine 7” touch screen. Nav doesn’t work anymore.

I’m sure I’ve forgot something. I’ll add more if I remember

I've had this truck for 4+ years put 60k+ miles on it, I use it like a tool and it has never failed me. I just pulled 3 guys out in full size trucks in the last 20" snow we got. I hate to get out of a truck but a 3 week old baby and my other two children are making me need more space. car seat is tight but we managed with my twins. 3rd child makes it impossible.