can you put a rear locker in a 16+ limited?

So im sure if there is a will there is a way. yet im not fully sure. ive been searching the threads and googleing my ass off. i still havent found the answer. is there a kit to add a rear locker to a 2016 limited? if so is it something that has to be done in a shop or is it pretty easy to install?

 

ARB makes an air locker. Harrop makes an E-locker. Or you could replace the stock axle with an Off-road/Pro axle.

Lots of threads here, try searching sport rear locker.

 

started to reword my searches and started to find alot more. thanks im going to edit soon or pull post. thnx

 

Yes, it is possible and is available. it is something you should leave to the pros. I believe the non TRD Off-roads models are 8 inch rear http://www.4wheelparts.com/eSearch.aspx?Ntk=primary&Ntt=tacoma+locker

 

Unless it's a manual, then it's the 8.75 or whatever

 

If you want to try a Harrop, they are on sale through Monday - $100 off

We have sold over 400 in the US in the last couple of years, no complaints, they work well.

Check it out: http://mailchi.mp/7b82601e77f7/cruiser-brothers-black-friday-sale

 

Installed an ARB locker on my 2016 Limited and its great. It was a done by a pro shop.

 

How much did it cost to install a locker

 

Depends on the shop. I installed an arb in mine and it roughlt 6 hours shop time. Its not just a locker, a good bit more goes into it.

If you have to ask if this is easy or not, then the hob is way out of your abilities.

 

Also requires wiring and mounting on board air supply.
To get it installed at a shop if they supply all items is easily going to be around 2200. Labor is going to be around 600 to 750 for the job.

 

Thanks for the input