Tapered 0.5" or 1" rear block

I installed progressive add a leaf icon on my truck that gave 1.5" rear lift. I feel like I am a nose high even though I truck is just leveled.

I like the little rake on my truck before thinking to add 0.5" or 1" tapered rear block.

Anybody knows where can I buy it?

 

What's in the front?

You're rapidly running out of travel in the rear shock and could do damage

 

Not really. Unless he drops a tire or stuffs one, his shocks will be ok.

 

Here, but as mentioned you are losing down travel and complete up travel will never be achieved . You are going to be looking for 0 1.5 to 3 inch lift bilstein
They make them in 3 sizes
0 to 1.5
1.5 to 3
And 3 to 5

Heavy Metal Suspensions - 1" Rear Lift Blocks Fits 1995-2023 Tacoma & 1999-2021 Tundra Lift Kit Steel Lift Blocks | For 2WD 4WD

https://www.amazon.com/Liftcraft-1995-2018-Tacoma-Inch-Blocks/dp/B00XD5Z58Q

 

With the overload in, it will give you 2" of lift. Guessing you pulled overload? No tapered blocks under 1-1/2" that I know of.

 

I took the overload.
The instructions recommended to remove the overload.

On the other hand, the clamps on both end of the overload leaf needs to be removed for it to be installed back because the progressive icon aal has it on both ends.

 

Overload will add the half inch you’re desiring.

Also, if you haul of tow it’s a benefit to reinstalling. 10% loss of payload without the overload installed.

 

This looks great but I like it tapered.
I had a non-tapered 1.5" block and I had a minimal vibrations at 15-20mph.

I placed 1" spacer on my 6112 front shocks to give 3" lift.

 

I have 3" lift after adding 1" spacer to bilstein 6112. I have 5160 rear shocks

 

I might just do that since I can't find any tapered block.


Thank you

 

Here are some 1 inch 6061-T6 solid billet aluminum blocks from Low Range Off Road. They are actually more like 1.25 inches with a one degree taper. Check them out. http://www.lowrangeoffroad.com/toyota-tacoma-block-and-ubolt-kit.html

 

Toytec has a 1/2” block that they call a “shim”... it will give you 1/2” lift out back