3rd generation Tacoma LED interior lights

I have a 2017 Tacoma TRD Sport 4X4 and I replaced all of my interior lights with LED bulbs. Map, overhead and visor lights. I have had them in for over a year now and just recently one of the bulbs came loose in the driver side visor light and once I snapped it back in place, all of my interior lights went out. Are the interior lights on a relay? Or a fuse under the dash? I checked the fuses under the hood and none of them are burned out and the fuse panel under the dash seems next to impossible to get to. If anyone has had the same issue? How did you fix it?

 

Welcome to TW!!

 

Welcome!

Sorry I can’t help, but hopefully someone else here can.

 

Welcome to TW

 

Welcome!

 

Welcome to TW! On the 2nd Gens there's a small fuse box to the left of your knees behind the plastic when sitting in the driver seat. Maybe the 3rd Gens have one there too.

 

I have an '18 access cab, but I'll assume it is the same as yours. Just in case you haven't figured it out yet, yes, there is a fuse panel under the dash by your left knee. There is a 7.5 amp fuse named "Dome" on the label, along with about 30 other fuses. The label is on the outside of the cover. The cover is tricky to get off if you have fat fingers like me. I had to use a hook tool on the end of the cover closest to you.
Good Luck, and welcome to the Taco Bar.

 

uh, you looks need a side step

 

Welcome to TW

 

Yeah those fuses are touchy. I installed the LED set from @mesojdm and blew the fuse twice. It's in the box under the dashboard.
and welcome to TW

 

Hello and welcome to the taco family.