Best Toyota Tacoma Roof Rack (for Thule/Yakima ski rack)

They have a strap. The Hullavator bolts to the Thule Cross bar and the bars need to hang over slightly on one side to work. That’s why I haven’t been able to figure out how to use with prinsu.

 

The Yakima landing pad 11 can be mounted directly to the factory hardpoints (at least on the 2nd gen but i think 3rd is the same)
https://www.tacomaworld.com/threads...to-fit-toyota-factory-mounting-points.313786/
Then you would need the control towers and oval crossbars I think
I have 1 crossbar mounted in the center spot and a hitch extender to carry my canoe

Edit: I’m looking at this and I’m thinking the roof curve where the front mounting points are located will make fitment of the landing pads more difficult than in the center location

 

I know your bed is full of gear, but what about on top of the bed? I’m using KB Voodoo bars then some longer screws and rubber spacers for my ski rack.

 

I have the KB VooDoo bars as well. Was wondering if you use the ski rack on them? I am in the market for a ski rack for my bars

 

I’m going to use for an RTT. I’m sure a ski rack would work just fine.

 

Looking to do a similar setup with the Hi-Rise Crossbars. What did you use for mounting hardware?

 

To get the snowboard rack to mount on top of the KB Bars all I used was longer bolts that threaded into the wingnut that sits inside the rack, rubber spacers to elevate the bottom of the rack and some fender washers. I'll take some pics this weekend.

 

Awesome. Thanks appreciate it!

 

Sorry for the delay

 

Such a clean look! Thanks for the help on this