DOME/MAP LIGHTS OUT

Hello TW

I have a 2017 Tacoma and my interior lights are out. Ive have checked and dbl checked all fuses, inside and in the engine bay.
Too explain ive had leds in my dome,maps and 4 6" led strips in the floor boards for over a year. Also 2 4' led strips on the exterior for courtesy lights. All were hooked up to the dimmer wire located in the drivers a-pillar. No problem for a year.

Saturday I decided to remove the exterior strips and add 8 rock lights from Amazon.

Aukmak 4 Pods LED Rock Light Kit for ATV SUV Offroad Car Truck Boat Underbody Glow Trail Rig Lamp Underglow LED Neon Lights Waterproof - White

https://www.amazon.com/gp/product/B01ABPGAUC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

So everything went fine passenger side was installed and working as should be. Then i installed the drivers side and i think what happened was the power wire touched the frame or wires crossed? Ya Ya stupid me i know!

Long story short is i can not figure it out????????

Any help would be great.

 

I recently installed a MESO dome light and lost power. I cheched the 7.5 amp fuse and tested fine with a test light, I removed the fuse and it looked fine. I then replaced the fuse with a 5 amp fuse (only handy one I had) and the power was back. I have no explaination so maybe try just replacing the fuse. I have a 2017 taco and the fuse I replace was the under dash fuse. Good luck.