SOLD

Alright ladies and gents. My "custom" Kings are for sale. Full discloser, all shock bodies have some degree of cosmetic damage from off-roading. I know, who uses their Kings, right? First off, NO, the fronts will not fit your truck without a drop bracket lift. Second, YES, the rears will work on a truck at 3" lift. They are slightly longer compressed length and about .75" shorter extended length than B110 5100's (real world measurement; King and Bilstein measure differently) Quite frankly, these rear Kings are 10x better than B110's (i have B110's on the truck now).

Selling due to a spindle failure on my RCD kit. Truck is now back down to 3" lift on 5100's (boo).

Front setup ~7k miles
Off the shelf "Pro-Comp lift" Kings - 25001-119A
Compression adjusters
600# coils
Finned reservoirs
1/2" top plate spacer (Used to optimize droop on my RCD kit. No issues with bottom out using Wheelers front bumps)
*One lower rod end bearing needs to be replaced

Rear setup ~10k miles
Custom length/travel Tacoma rear shocks - 25001-121A
Compression adjusters
Finned reservoirs
16.875" compressed length
27.0" extended length
*one seal is leaking
*one lower rod end finish is worn from debris hitting it
*both chrome shafts have some degree of minor damage from debris (dont need replacement, just disclosing)

All resi brackets/clamps/hardware included. Setup will ship in original boxes.

Currently, this setup will run you over $3700, plus top-plate spacers and likely a 2-3 month build time. This set just needs one seal and one rod end bearing.

$2800 shipped. I'll eat paypal fees.

Will only split if I have two COMMITTED buyers. Split will be $1700/$1100.

 

damn I would have been all over this a couple weeks ago. Just put the Fox 6" stuff on my truck. Free bump for a sick set up!

 

Bump. Let's get these sold and put to good use.

Will entertain cash offers.

 

These will work better on someones 6" lift than being a doorstop.

Lets talk if you're interested.

 

Bump 'cause these are sick!

 

Interested

 

SOLD