Soft top w/ rack

KB Voodoo modified and stretched to fit over the softopper. Stretched as far as the mounting rail in the bed and hugs the topper tight. The platform for the top that I made is still drying so it’s not mounted here. I also reinforced and dimpled the holes in the rack to add some strength to the thin steel.

 

That’s a really nice fit

 

You got a write up lol, prob the best looking one I’ve seen

 

I dont. I made L brackets 4"x4" then welded bushing tabs to them. I welded bushing ends to the legs so all it takes to remove it is 4 bolts and it's off.

 

https://www.tacomaworld.com/threads/smokey-bear-2017-dcsb-v6-mt-mgm.458673/page-2#post-14978230

https://www.tacomaworld.com/threads/smokey-bear-2017-dcsb-v6-mt-mgm.458673/page-2#post-15206094

 

oh this looks good

 

https://www.rackitinc.com/

 

Its a solid rack, and was given to me. Its overkill for my usage, but gives the truck a solid look.



4 boats up there.

I really like I can drop the topper down with out messing with the rack.

 

Love your setup!

 

Thanks! I modified the rack to fit over the topper. Here’s the finished product: