Cement Tacos let's see them!

Thank you. It is a Dakar medium pack.

 

Definitely like the stance. How many turns or inches do you have on your front kings. I’m getting ready to install my kings this Friday and want to know how much to compress them. I wanna get 2.5 - 3” up front.

 

9 on one side and 11 threads on the other for the taco lean.

 

May i ask where is this place? And will my stock OR be able to ride those sand?
Thank you

 

are those the matte gunmetal or the matte grey color? at first glance I thought they were the matte grey

 

Looks like Oceano/Pismo Dunes. Stock trucks do fine, just air down a bit.

 

Correct.

 

Ok your truck is so sick. I see you are running Kings, how much did you crank them up to that much lift? Another question is what size tires are you running? Thanks.

 

9 threads on one and 11 on the other. Tires are KO2’s size 285/70/17. Wheels are 17x9 -38

 

Does the ride quality suffer at all with them cranked that much?

 

Not at all better than OR suspension. I have the same setup 0 offset wheels, +3 caster

 

Had a 2014 trail 4runner. kept my FN wheels and put them on my new TRD off road taco. So far I'm loving it.

 

What size KO2s are those? Looks great

 

Thanks, they are actually just 265/70 17s.. but I think the FN countersteer type x wheels really help the tire look better. they are -10 offset and 4.1 backspacing.

 

I've been making small tweeks to mine. I initially went for all black, black emblems, black rear bumper covers, PRO grille (or OR grille with black surround), black exhaust tip, pro tails, etc. but I ended up dialing it back, it started looking like I was trying to hard. I am quite happy with it here, and the pro skid of course looks amazing. I really really really want the scooped hood, but for non-functional I just can't justify spending the $700 to get it done (+ scoop itself).

Cheatsheet: front:885/5100s + .25" spacers, rear:1.25", 16x8" XD301, 385/75R16 Cooper Discoverer AT3 XLT

 

Did you have any rubbing or clearance issues with your setup?

 

So far so good. I have had ONE tiny rub when full lock reversing down a steep incline of a drive way but it was an abnormal position. Aside from that I've had no problems at all.
When this wheel setup was on my 4runner I had rubbing at full lock in reverse on flat ground and did the 5100 shocks and raised it .85 to clear and I still had to push the wheel well liner in a bit with a heat gun. But this Tacoma clearly has more travel room than the 4runner.

 

Finally added rims.

 

Just a couple quick mods completed today...all blacked out now.