New member, Thanks. (and Question)

Appreciate the membership. I have been following and gaining information from this great site for awhile now. I do have a question I cannot seem to find the answer to. I have a 2017 Double Cab short bed that I want to put a Leer 100R on. I need to find the inside height of that specific topper on my truck model, of either the topper itself or the entire height from bed rib to topper ceiling (?) If someone out there has the answer it would be a great help. Thanks!

 

Welcome to TW

 

Welcome, and here's a thread with bed dimensions: https://www.tacomaworld.com/threads/detailed-bed-dimensions.400407/

Looks like bed is 19" deep, and you'd have to add the Leer height to that to get the total height.

 

Thanks for the welcomes. Thanks also for the reply. I do have the truck already so know the bed size and probably did not make my question clear enough. I want to fit some specific size items in the truck and am trying to plan ahead to see if that topper will provide me with enough vertical room. I need the height of that topper itself (or if someone has that setup) the height from bed to the inside top of the topper. Appreciate it.

 

Hopefully someone with that setup will chime in with an actual measurement, but that is a cab-height topper, so you should have 19" + 20.5" maximum. I'd knock off a couple of inches to account for bed ribs and headliner, and just say around 36" to 37.5" to be safe. Keep in mind the lip that comes down above the rear window -- if you need to slide whatever it is into the space, I'd say 35" or so is about the tallest item you could slide in there.

 

Thank you.

 

welcome

 

Welcome!

 

Welcome to TW!!

 

Welcome to TW!