1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Rear lift, which shock? 2nd gen Rear shock options WITH lengths Rear Lift w/ LEER cap question? Firestone Ride-Rite Air Bag Install Question DIY LCA Bushing Replacement 2005+ Tacoma (4x4) Bilsteins for Taco 06 4x4 Leads????

Bilstein 5100 part#s and leak help

Discussion in 'Suspension' started by Bigtrees, Apr 16, 2019.

  1. Apr 16, 2019 at 8:32 PM
    #1
    Bigtrees

    #1
    Bigtrees [OP] Well-Known Member

    Joined:
    Aug 15, 2018
    Member:
    #262993
    Messages:
    61
    Oregon
    Vehicle:
    2002 Reg Cab, 2007 DCSB
    I’ve got a 2002 regular cab Tacoma 4x4. The rear passenger side shock is leaking terribly, so I bought a replacement. Original part number for rear pass side was F4-BE5-D560-T0.
    Upon ordering a replacement, I somehow ended up with
    $104 33-247717 5100 Series Single Rear Right Shock Absorber fits 1996 2004 Tacoma - Fits Vehicles with 1-1.5" Rear Lift - Minimum 1" Lift Block Required for Installation
    33-247717.
    Having trouble finding decent info online between the two shocks, it appears the F4 is 22.57” extended, 14.65” collapsed vs 22.090” extended, 14.070” collapsed for the 33-... Question is, will this shock be ok if I go ahead and install it? The part number does confirm for my vehicle... Rear leafs were replaced with General Spring HD leaf pack at time of 5100 install. From factory height, I likely gained 2.5” of rear lift (never measured b&a). Leafs and shocks were installed early 2017.

    Any input or insight is appreciated. Thanks!

    2DB3ABB4-06B7-4EFE-82D9-F04A412E91E3.jpg
     
    Bigtrees, Apr 16, 2019
    #1

Products Discussed in

Bilstein 33-247717 5100 Series Single Rear Right Shock Absorber fits 1996 2004 Tacoma - Fits Vehicles with 1-1.5" Rear Lift - Minimum 1" Lift Block Required for Installation
$104.00
To Top