AZ Classifieds

Where u located

 

Where!?

 

Avondale

 

First one to get here wins.

 

He replied 1st. Will let him call it.
I'm near Goodyear.

 

I’m here in Avondale what’s address loo

 

I asked first hahaha

 

(4) 285/75/16’s on AMR wheels. Lots of tread left and wheels in great shape. Comes with lugs. 200 bucks sold

 

Got some stuff collecting dust now, located in Tucson.

1st gen DCSB tan Softopper. Had installed for 2 years between Tucson and San Diego. Topper is still in great shape over all. Comes with a never used cover to protect when it’s folded down.



Front and rear window have some miles on them, front is still pretty clear, rear probably should be replaced. Both can be had from Softopper for like $50-75 last I checked. Very easy swap, just unzip/snap and pop in the new one. I just kept it rolled up full time.



All the buckles are in great shape, except one is cracked, it still clips if you give it a gentle hand.



Has very light staining from driving around at work. It has come out with some 303 cleaner in the past, but I gave up cleaning it every time, since it happens pretty frequently (I work at a mine). You really have to be up close to even see it, even the photos don’t pick it up that well.



Overall been very pleased with it since I purchased it, but finally found the shell I wanted so it’s time to let it go. Looking to get $450 and willing to meet/ TW express to Phoenix.




Vista Shell for 1st gen double cab

Came with my truck, glass is all in great shape. Have 2 sets of keys and both locks work great. Previous owner added the roof rails. Will come with Rola basket simply because I have no use for it.

Looking to get $450 for it











(THIS ITEM WILL REQUIRE SOME FABRICATION TO MOUNT/USE)

Up next is a custom 1st gen Demello dual swing out. I bought this used from a member on here last year. He pulled it off a truck that was totaled and never pulled the mounting brackets off the old truck before it was crushed. So if you aren’t afraid of a little fabrication this will be a cheap way to a dual swing out. It also is not a traditional locking method, just a spring loaded bar that runs through both swing arms.

Powder coat was redone about 6 months before I purchased it.



The swing outs were added after-the-fact by the previous owner. I honestly couldn’t really tell you much more about it since the previous owner didn’t really know much aside from the swingouts. Since this bumper was not initially designed with swing arms in mind, the spindles block the tailgate from opening fully. Again, if you’re not afraid of a little fabrication this shouldn’t be too tough to relocate them.

Looking to get what I paid, asking SPF, will meet or deliver in PHX/Tucson. Can provide more pics if needed

 

I appreciate it!! May have to take you up on this if I can't find one on the east side any time soon. This is the culprit!!

 

Friend of mine wants to sell her camper shell. It's a silver first gen snugtop. Short bed. Comes with keys to lock it and it's in good shape. Anyone looking for one? What do these typically go for?

 

1999 BMW R 1100RT - $3000 or OBO

Graphite grey metallic
VIN: WB10418A4XZC66960

Mileage: 64,8xx

Original Operator/Rider Manuals
Auxiliary driving lights (PIAA)
Throttle Master cruise throttle
Heated grips
ABS brakes
SS brake lines
Sargent custom seat (adjustable for height)
Handlebar risers (raised about 3/4” and can adjust fore and aft to fit rider)
Electric, adjustable windshield
BMW side bags
GIVI V46 top case with integrated LED brake and turn signal lights
Cylinder head guards
Highway pegs
Full cover
New battery August, 2018

Approx 4300 miles since installed new in-tank fuel filter, new alternator belt, and new rear brake pads, July, 2017.

New Pirelli Angel GT tires at 58,500. They are currently in excellent condition with many, many miles remaining.

All drive line fluids and oil filter changed regularly using Amsoil synthetic lubricants in the engine, transmission and final drive. It was just serviced about 175 miles ago at 64710 miles, including front and rear brake fluids flushed and replaced with new.

Bike runs great and has been completely reliable. No leaks anywhere and engine does not burn any oil. I’m selling only because I’ve bought another bike and cannot keep both.

What’s not great:
There are minor, cosmetic scratches on outside edges of mirror housings as well as the usual wear marks for a bike of this vintage. 2 new cans of color matched spray touch up paint is included - I just never got around to doing the painting.

More pics on CL ---> Click here

 

Not mine. UCA for sale.

https://tucson.craigslist.org/pts/d/vail-all-pro-arms-uniball-tacoma/6871635870.html

 

interested. What brand tire and date code?

 

Wtb 17in trd matte black wheels

$280 PTR20-35110-BK Toyota 2010-2024 4runner TRD 17" Matte Black Wheel PTR20-35110-BK

PTR20-35110-BK. I’m outside of Tucson but can make a drive

 

You still have those bronze trd beadlocks?

 

Yeah, they're on my Tacoma. Looking to get the black ones for a 4Runner. RTT works great btw thanks again!

 

If I sell my wheels, or if you still have them in a month I’ll take em. Anyone looking for 16x9 Walker Evans Legacy? Lol

 

Are you you interested in the rims or tires? Or both?