Largest tires with a 2” lift and 16” Ray 10

Over stock 31" yes, but a 265/75 ko2 is 31.6 and my st maxx are a hair over 32.

 

Yep. But also having trouble because my cam tabs are siezed like a mofo.

 

Yup. Didn’t wheel with that setup, but I’m pretty damn sure I wouldn’t have rubbed. I had absolutley no rubbing issues with it on regular day to day driving on the road. Plenty of room from what I saw. Here’s a pic of 265s with my F5s.

 

That’s the setup I want man! Looks awesome.

 

Wish I had ray’s but stock ain’t bad

 

You have any other pictures from different angles of your truck? I haven’t seen all too many people with those tires.

 

Assuming your willing to do CMC and pinch welds and cut some plastic fender and have UCAs to have a caster of 2.5-3 you can do 285/75r16 on 1.25” spacers with the smallest of rubbing incline turning going 15mph.

Without the wheel spacers I was okay with everything minus a pinch weld.

Good luck.

 

I’ll get some today sometime...

 

I have a 2” lift with 285/75r16 Taco Pro wheels...everything cleared just fine until I installed my JBA UCA’s....i then had to get a CMC, beat the pinch welds, trim the fender flares very slightly, heat, mold and cut the plastic wheel well liners and mud flaps. I also had to add 1.25” Spidertrax spacers. Everything clears fine now and the alignment is on point.
I did just order 1” BORA spacers instead of the 1.25” in order to get a tiny bit more clearance at full steering wheel tilt.