What Have You Done To Your 3rd Gen Today?

Where are these and who do I have to kill to get them? Lol

 

Haven't done anything yet....but a box just showed up at work, a box with new Coverking seat covers. Looks like I'll be spending some time tonight putting those on. Woohoo!

 

Yeah,the Taco pro wheels look great but I tend to agree. I like the matte wheels design and color a little better. I bet they would look excellent on the voodoo blue pro too. You could probably make the swap and not lose too much cash. I bet your wheels fetch top dollar on the resale market. Trdparts4u has the 4Runner wheels for 4170 right now I think before shipping....

 

Psh. That's nothing compared to how bad it looked sitting in that ditch!

 

Do you know / remember how wide these work truck wheels are? I would think a 225 would pop a bead too easily on any wheel wider than 7 or 7.5 and these give the appearance of being pretty wide.

 

Made my own mount and installed a 3 gallon Rotopax.

 

Added the Tacoma TRD Pro wheels today.

 

SUPERbumps
Flip kit
Thank you @Wheeler's Off-Road Inc

 

Believe it or not, I had to fight a Veloci[Ford Ranger]raptor to get the two side badges. The rear ones were my reward.


Jk I got the side emblems from @runnin4tacos. I think they got a sale rn on it btw

 

Went on a camping adventure:

 

It's taken a while, but I finally came up with a solution.

Well, a couple months ago (I just couldn't wait any more) I installed the FJ Cruiser TRD Pro shift knob. I knew I would have to revisit the shift boot, and had been thinking about it ever since. In the mean time, I just zip tied the boot to the shaft:



Yes, it looks like a Walmart granny with her tee shirt tucked into her panties. It just wouldn't do. I also had to do something about that chrome nut (you know, the Toyota war on chrome and all, I had to stay faithful to the cause) I was going to derp the nut, but being eager to eradicate this evil silver stuff, I just slipped a piece of shrink tube over it and called it a day. I finally had an idea as I was dosing out some children's Tylenol to my son. I decided to use a medicine measuring cup to make a collar for the top of the shift boot. I cut a hole in the bottom (now top) of the cup, and cut some fender washers (for lack of a better term) out of a piece of EVA foam (harbor freight anti-fatigue floor mat that I purchased to shadow my tool box).


Then crammed it all together for a test fit:




Not perfect, but close enough. I then derped the plastic cup, used a little calk to hold it all together, sandwhiched the top of the boot between the two pieces of foam and pushed the cup over the whole thing. Yes, the humidity was high when I derped the cup, so I will probably redo it eventually. End result:




EDIT: All of you 3D printing geniuses, there's probably a market for a collar that would clip to the stock shift boot collar for anyone using an other than stock shift knob.

 

They appear to be 8" wide. The tread area is just over 7" wide and the side walls stick out about a half an inch or so on each side of the tread. The mechanic actually installed them so I am assuming he knows what he is doing. Thanks for the heads up.

 

I wanted more light in the bed when the cover was raised so today I wired up a set of LED strips that I found at AliExpress.. i’m Not fond of pin switches so I used a set of magnetic garage door switches to make the connection. Lots of light back there now.

 

I pretty much had to cut every piece accordingly

The drawer sits perfectly width wise however i had to shortened it length wise. I cut off about 4” of the drawer towards the back. I used 1/8” metal plates to mend them together.

I used 2x8’s for the front mount. Trimmed about an inch off the width and used two bolts to mount them to the bed.

The rear is mounted to the TC bed stiffeners, making sure it’s snug on the side against the bed.

Also had the shortened the rail a bit.

 

where is this?

 

Nice work!

 

Elkhorn Ridge, Santa Margarita, CA

 

Dear lord you took a trip to the Windows desktop background!? JK, beautiful view and beautiful photos mate! I'm jealous, what a scenic place.

 

Is the bed liner still sticking well? What did you do for prep before hand?

 

Thanks! Much appreciated.