What Have You Done To Your 3rd Gen Today?

No it still seems solid. We get temps from the teens in the winter and high 90’s in the summer. Can beat it for the money.

 

Nice, i just felt like it could snap while tightening down the clamps, didn't want to over tighten them. Hopefully it serves me well. So far I'm liking it. No noises and handles 65 - 75mph just fine without lifting.

 

Haven't posted in awhile but here's my 2019 DCLB OR with Premium Package. Did 15% ceramic tinted up front (rears to come), OEM black steps, 265/75r16 Cooper ATPs, Bakflip MX4, OEM bedmat, a S&B Cold Air Intake and OEM black emblem overlays. 6700 miles on her! Freshly clean before the damn rain lol

 

It was fairly easy.

Ran 12 AWG from my Blue seas fuse panel, down through the wheel well, down along the frame, along the taillight wiring, up into the taillight well into the rear of the bed. I bought the parts on Amazon. There are a lot of options. Just find one you like. I use a hole saw and drilled three holes into the bed liner. Mounted the switches and that was that. If you dont want to drill holes like that into your bed you can use a wiring box. Like one used for 110v stuff. Ive seen that before.

 

Exactly why I did this as well. As well as other devices while I am camping. Ran 12 AWG from my Blue seas fuse panel, down through the wheel well, down along the frame, along the taillight wiring, up into the taillight well into the rear of the bed. I bought the parts on Amazon. There are a lot of options. Just find one you like. I use a hole saw and drilled three holes into the bed liner. Mounted the switches and that was that. If you dont want to drill holes like that into your bed you can use a wiring box. Like one used for 110v stuff. Ive seen that before. It works when the truck is off, yes. I installed the on off switch for that reason.

 

Brand?

 

Auto Ventshade 21681 Hoodflector Dark Smoke Hood Shield for 2016-2018 Toyota Tacoma

Auto Ventshade [AVS] Hoodflector Bug Shield/Hood Protector | Fits 2016-2023 Toyota Tacoma, 1 pc. | Dark Smoke - 21681

https://www.amazon.com/dp/B018AIGTGC/ref=cm_sw_r_cp_api_i_Wqp0Cb5F2489N

 

Welcome to TW!

 

Very nice.

 

Thanks what amp fuse did you use?

 

You like that cold air intake? thinkin about one.

 

Took the Black vinyl off the B-Pillars

 

Postman came today bearing gifts! LOL!

 

Thanks

 

Schäferhund is what they call German Shepherds

 

My LED's in my headlights are awesome! But the OPT7 H11 in my fog light are way too bright! I need to switch them out or adjust them dowards a bit more. (Not sure if it's a problem) I have never been flashed? But it's way brighter then the stock fogs. So just as a courtesy to others I'll swap them out for lower powered LED's.
I haven't had the chance to look into it? But are these fogs adjustable?

 

Painted my oem rear bumper black yesterday.

 

Here is a pic
https://www.tacomaworld.com/threads...d-today-3rd-gen.400627/page-321#post-19364520.

 

Installed my RCI sliders (all by myself...pita) and took the pups out

 

Does anyone have the measurements for the stock TRD Pro badge?

Looking for:

1. front door edge to Pro badge
2. upper door crease to door badge

I want mine to be in a spot that’s as close to that as possible.