Need ideas on raising the front of truck

Hi, I’m currently running king 2.5 EXT front and rear with 600#, TC UCAs, ome Dakar medium and 295/17 tires.

My issue is that the back is higher than the front about an inch. I’m looking to even out or maybe raise it a little higher than the back. If I had a camper or towed I wouldn’t mind having a little rake.

Ive searched the forums and tried the “swapping springs to heavier coils” to create less sag but that was a big mistake. The ride was stiff AF.
Also, I’m maxed out on raising my kings (raised about 2.5 -2.75”) so can’t raise the front using my coil overs.

I read you can get longer springs? I have EXT travel springs and the next ones up are Long travel springs? I can’t use those. What springs are people talking about?

Any other options or input will be greatly appreciated. Thank you!

 

Night bump

 

No one?

 

You may need longer springs, not heavier.

@AccuTune Offroad is a good reference for a solution with your Kings

 

@Rd62 does @AccuTune Offroad make custom longer springs?

 

I dont know make but they offer Eibach coil springs on their website at various lengths up to 18in and in various weights.

 

Ah I see. I’ll give them a call. Thanks

 

Good luck

 

Yep, give us a ring and we can give you some options. 424-377-0808

 

Wanting to do something similar, is it possible to remove a leaf from the Dakar's?

Just a thought...

 

I believe so. What’s your issue? Rake?

 

Well, that'd solve your issue then wouldn't it?

I'm not sure how much my OME Dakar's will lift the rear of my 1st Gen; they're listed at 2.5" but others have reported higher.

Looking to "level" my truck the same as you, and I've got my Fox 2.5 CO's set at 2.5" of lift (pre-load set from the factory). I also don't carry or tow anything but I do have a Trail Gear rear bumper.