3rd gen with larger tires and/or lifted on STOCK WHEELS

Never had those tires before.

 

Stock wheels is where it's at!

FS: [Bishop/BigPine, CA] REDUCED $400 Cash! 2016 O.R. wheels w/TPMS, Wrangler TrailMark

 

285/75/r16 on stock suspension

 

Looks great! Do you have a lift?

 

That looks super clean I like the look of 265 think I will go that route

 

Wow that looks really good! Witch lift is that the link just goes to web page.... thanks!

 

just the stock lift on the TRD Pro

 

CMC or rubbing?

 

hi hows it going? just purchased my first taco. looking to do a lift and tires in near future. did u need a wheel spacer with that tire setup? or did everything clear ok?

 

285/75r16 K02 No rubbing at all.

 

nice, looks good. what u have for a lift if any?

 

No lift just stock TRD Pro suspension

 

315/75r16 BFG KM3

 

285/75/16 on BFG K02's, Caster adjusted to 2.0 in the front. I have an OME lift kit installed on my truck.

While it doesn't rub on the control arm or anywhere else during somewhat normal driving, if you go over a speed bump or a slight bump while turning it rubs. Don't think its CMC worthy necessarily but it needs a trim for sure so I don't rub while off-roading. I will be doing the CMC and trim when I have time, since I plan on buying an RTT and other weight adding accessories. To be honest I've had a lot a work this month so I haven't been able to do that yet. Once i get a picture on flat ground I'll post it.

It should be noted that the reason I went 285 over 255/85 in the first place is the "No Rub with no lift (or minor lift)" report from other users on various threads. After seeing these installed, and riding on them for a week or so, its my belief that this is simply put inaccurate. I have a 2 in lift, caster adjusted to +2 and it is very clear if I didn't have either/both of these things this setup wouldn't have worked. My recommendation for users reading these threads is to simply expect to have to trim at the least, and CMC at the worst.

 

Took some photos of my truck with 285/75r16 next to a stock TRD PRO for reference for those thinking of upgrading to this tire size

 

Yo

 

-265 75/16 on stock wheels
- Supreme 2" front and 1" rear level kit.
- 1.25 Spidertrax spacers..

If I decide to go with 285s, then I'll replace suspensions 2.5 fox or Icons, control chaos UCA, a CMC /pinch weld, and a beer..

 

2/1 lift