What Have You Done To Your 2nd Gen Tacoma Today?

And don't forget that half pushed pin sticking out there. Hope you pushed it in because I'm not sure you would have got the tire on with it sticking out....and it's a real bitch to drive em with only 3 tires .

 

Thanks for sharing the knowledge @jproffer. Yes I did pushed all the way in and also secured with the safety pin at the end. I just took the picture before completing it

 

CAI Mod. OEM to Volant.



Noticeable response improvement. Slight MPG increase.

 

i have this too.
love the high RPM growl

 

Is this the equivalent? Do you have other part numbers or sources?

$531 Volant 382406 Air Intake (Closed Box with Cold Air Scoop), 1 Pack

https://www.amazon.com/Volant-38240...for+tacoma&qid=1557856724&s=automotive&sr=1-4

 

traded her in for a 4x4 4runner, good bye fellas, its been a pleasure

 

you know theres a 4Runner section to this forum right

 

I figured as much ....just givin a little ribbing

 

Like @whatstcp said, you just did a mod without knowing. I am planning this mod when I do my first brake job on Betty. I actually noticed my pads making the "clunking" sound while on lunch today. Backed out of a spot and when I stopped at the next time, I could hear them seat forward.

 

I like those intensities so much better than a lightbar.

I didn't want to leave so I bought both.

 

They're fake..

 

Weird.

 

$90 on Amazon for the set. I bought the intensity light covers and they fit.

 

I'd stick with those. Lightbars are rainbow.

 

I agree, but the new bumper I got coming..they don't fit. Such is life.

 

Choose this route to take advantage of the sun to heat the water.

30psi pop off valve. Hoping it’s not too low. Looking back I kinda regret not getting an adjustable one.

 

Just fyi you can disconnect the clutch cancel w/o any problems for xtra space. I never used mine so I deleted it & moved switches up top in the blanks. Switch on far top right will be rear locker eventually. This way I can keep all lighting together.
Bottom is (left to right)...
Fogs, spots, bumper light bar & last will be ditch lights.

 

You can disconnect the clutch cancel switch or just completely bypass it by junpwring the male connector down near the pedal.

Did this with mine. You lose the safety interlock feature but you can start the truck without pushing the clutch in.

 

my truck shoots rainbows