Wanting to Install a Viper Keyless entry/Remote Start system 19 Tacoma SR

Hi all,

I have been searching for a few days now trying to find information on how to install a keyless entry/remote start system into my 2019 SR. I don't want to go for the oem Toyota keyless entry system as I would not have the best range or remote start functionality. I am specifically looking at the

$150 Viper 4806V 2-Way LED Remote Start System

Viper 4806V system. I have been able to find some information on locating door locks and horn/lights. But not much further than that, I have a bit of install experience from previous vehicles but I was always able to find a wiring diagram that showed me where to look and what wires I needed. Has anyone been able to find a diagram or anything that may make it a bit simpler to install?

Thanks in advance,

Nick

 

I believe Techstream should have wiring diagrams available; you can subscribe for a short period and print off what you want. Probably in the factory service manual as well; refer to https://www.tacomaworld.com/threads/2016-tacoma-service-manual-availability-pdf.485229/page-6

I wish you good luck... And I wish better luck still on the next owner who has to remove the thing and fix the butchered wiring harness.

 

This is true, I have a viper alarm in my Tacoma that was installed by the previous owner. What a rat's nest mess of a wiring job. I like the functionality of the alarm but would never install one myself. Only reason I have left it in is because of the butchered wiring done...

 

Thank you, I'll see how it all goes. Something tells me I'll me making a run to car toys/ best buy for an install. Don't really want to butch my new truck lol.