TRD WHEELS

I HAVE A 01 TACOMA SR5 AND WAS WONDERING ABOUT PUTTING THE NEW TRD WHEELS ON HAS ANYONE DONE THIS AND HAVE PICS OR IS IT A BAD IDEA HELP ME PLEASE

 

just went through the same on my 03 6 lug. start'd look'n at steel FJ 17" rims vs 16" stock steel. my understand'n is 2nd & 3rd gen have different offsets (set further in). you can run 1st gen on 2nd & 3rd, but not vice versa without spacers. problems can be UCA, brakes or tire succumb'n. not say'n it wont (?) work. i end'd up find'n x4 1st gen tundra steels out of a junkyard, same size as 03 taco stock rims. good luck.

 

Lots of people have, you just need to search around for them. I know I've seen several posts about it. IIRC, the wheels will fit, but they have less backspacing which puts the wheels closer to the frame.

 

Here's the 2018 sr5 wheels I just got for my 2002... I got these and the tires, they're take-offs
with 20 miles on them, from a fellow who wanted bigger wheels on his new truck. A couple of
others on here who have done this mention that you'll be limited in how wide of tires you can get
after you do it, quiet street oriented tires are good for me... I like this set up well enough that I
just ditched my too-old-to-use spare and got another one of these tires put on it...



Beware, you might need different lug nuts too... OEM lugnuts can be spendy...

-Mike

 

ANYONE KNOW WHOS TRUCK THIS IS I NEED SOME INFO

 

Is your caps lock stuck on?