1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

*SOLD**Used Spidertrax Spacers - 1.25"

Discussion in '3rd Gen Tacoma Parts Marketplace (2016-2023)' started by seelyartacus, May 23, 2019.

Thread Status:
Not open for further replies.
  1. May 23, 2019 at 4:23 PM
    #1
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    358
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    Getting rid of these. Don't need them any more since they were a solution to an axle problem that I now fixed. These are very slightly bored out inside to accommodate my issue, but they are still hub-centric. I only have 10 lug nuts too, set of 6 that match, while the other 4 are different but match each other. :notsure: Local pickup preferred but if you want to pay shipping I'll get them out to you. $30

     
  2. May 23, 2019 at 9:35 PM
    #2
    Stretch2323

    Stretch2323 Well-Known Member

    Joined:
    Jan 13, 2018
    Member:
    #241091
    Messages:
    399
    Gender:
    Male
    Vehicle:
    2016 OR
    Two or four?
     
  3. May 23, 2019 at 9:41 PM
    #3
    stealthmode

    stealthmode Well-Known Member

    Joined:
    Dec 7, 2014
    Member:
    #143869
    Messages:
    2,407
    Gender:
    Male
    Alberta
    Vehicle:
    2016 Short N Stubby Bed- MGM
    Front and Rear lifts Tires ECGS bushing Lots of other crap +HP sticker
    What was the axle problem?
     
  4. May 24, 2019 at 10:47 AM
    #4
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    358
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    I had an aftermarket axle built. They didn't create the axle flanges to factory spec so the bore was too big for my wheels.
     
    stealthmode[QUOTED] likes this.
  5. May 24, 2019 at 10:47 AM
    #5
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    358
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    just 2
     
  6. May 24, 2019 at 8:22 PM
    #6
    4sky

    4sky Well-Known Member

    Joined:
    Jan 8, 2019
    Member:
    #278637
    Messages:
    426
    Gender:
    Male
    First Name:
    Kevin Levu
    Vehicle:
    2018 White Tacoma PRO
    I’ll buy em !
     
  7. May 26, 2019 at 3:44 PM
    #7
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    358
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
    Where ya located?
     
  8. May 31, 2019 at 3:50 PM
    #8
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    358
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
  9. Jun 3, 2019 at 4:22 PM
    #9
    seelyartacus

    seelyartacus [OP] Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83033
    Messages:
    358
    Gender:
    Male
    San Diego
    Vehicle:
    '16 TRD Sport 4x4, grey, tech&tow pkg
    FNWheels six shooter matte bronze, Falken WildPeak M/T 295/70/r17, All-Pro Expedition leafs, Fox Factory 2.5 w/ res (front/rear), Icon billet UCA w/ sphericals, custom sliders, 4.56 re-gear, RCI bed rack , Tepui RTT, Prinsu Designs Cabrac, CBI T3 alum front bumper, CBI T3 rear bumper with dual swing away and tire carrier, 20in light bar, Warn VR10s winch, Factor 55 fairlead, flatlink, and hitch recovery point, All-pro alum skid, Rotopax, CMC, Timbren bump stops, rear Rigid Duallys, Rigid Dually ditch lights, ARB awning with LED lights, Currie F9 rear axle housing w/ Strange Engineering 3rd memb and ARB air locker., rear diff beather relocation, ARB compressor under hood, Bussman panel, 3d printed switch panel,OVTune ECU
Thread Status:
Not open for further replies.

Products Discussed in

To Top