1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Alignment Numbers - Am I Crazy? Can it be done?

Discussion in '3rd Gen. Tacomas (2016-2023)' started by UTAH GetMeTwo, Jun 7, 2019.

  1. Jun 7, 2019 at 9:57 AM
    #1
    UTAH GetMeTwo

    UTAH GetMeTwo [OP] Well-Known Member

    Joined:
    Feb 23, 2016
    Member:
    #179171
    Messages:
    132
    Gender:
    Male
    Cave Creek, AZ
    Vehicle:
    21 4RUNNER ORP KDSS
    Recently installed 5100s with OME 885s (stock UCAs) for about 1.5" lift and took a chance on a local alignment shop close to my work. Regret it.

    Told him to aim for 2.0+ caster (specifically higher on passenger side by .2-.5) while keeping camber as close to 0.0 as possible and toe less than 0.05

    Tacoma%20Alignment_zpsyttkwcl4_32ac5ecf5bb148283c175256a86147fe55090aa3.jpg

    Wasn't happy with the numbers and truck pulls right. Took it back today for another round of "it's within specs" and "you're in the green". Don't think it's going to end well...

    I know getting caster that high and keeping camber low is especially difficult with stock UCAs, but has anyone had luck getting close to those numbers?

    Thanks!

    ***UPDATE: Swapped front tires to address pull. Helped some. Could be better***
     
    Last edited: Jun 7, 2019

Products Discussed in

To Top