Big 3 Supplies

I am looking to do the big 3 upgrade to my truck and I was curious if there was a reputable place to purchase the cable, connectors and tool to attach the connectors for not an arm and a leg? I am wanting to cut and crimp my own rather then purchasing a kit so I know the cables are the exact right length.

 

Gas pro man

 

I use knuconceptz wires. I also have a hydraulic crimp and cutters that can cut through 0 gauge like butter. What size wire were you planning on using? Depending on size, you may be able to get away with using a hammer to do the crimps. The cutters are from scorpion.

Got it on all Amazon.

 

When I look up Gas Pro on Google its sending me to Airgas in Waipahu, is that the right place, or is there somewhere else that I am misssing?

I was looking to do at least a 0 gauge.

 

Same place. There's one on dillingham also.

 

Right next to medagold beginning of dillingham

 

industrial electronics might have some stuff too

 

https://www.tacomaworld.com/threads/electrical-system-upgrade-groupbuy-big-3-plus-closed.391316/

 

i have a good amount of knukonceptz 0 gauge wire if you want to buy. pm if interested

 

@happyb I might hit you up on that, I'll PM you by Tuesday to let you know either way

 

What were the final lengths of your wires?

 

12 16 18

 

I have a good amount of knukoncept kca 0 gauge I’m taking out to replace with their kolossus series 0 gauge. Can give you a deal if interested. Gonna do my big 3 and replace my alternator with a singer 275 amp alt.

 

Got photos of the grounding points?

 

Maybe tomorrow look up dubblesinner on here. I followed him