What Have You Done To Your 2nd Gen Tacoma Today?

Eh it was bound to happen only thing I'm upset about is I got a big wheeling trip next weekend leaving Thurs and have to get it fixed by then.

 

Finally put a receiver hitch on the truck and added a Smitybilt Beaver Step.

 

Looks like a nice spot!

 

That’ll buff out.

 

First time sharing on here, hope ya'll like!

 

Oh no!

 

Got some Morimoto amber LED's thanks to @Hyland33.

 

Cool little spot outside of Cle Elum I discovered last weekend while exploring the area. Would happily revisit anytime

 

Congrats!!

 

80k oil change, just before Utah trip

 

Maybe not today, but..

After the months of research, uncountable messages, a group buy, numerous phone calls, references, measurements, and a few “doctors appointments” from work, I’ve got the heavy lifting done.

The top photo is the state that my truck has been in since I picked it up last May. Decrepit suspension thanks to the former owner’s excessive use of the bed paired with the pedestrian version of General Grabbers.

The middle photo is after the figment of:
Fox 2.5 coilovers (883-02-025)
Fox 2.0 extended rear shocks w/ external reservoir (985-24-118)
SPC adjustable UCAs (25470)
Icon RXT leaf packs on the second setting (51101)

The third photo was an hour ago, after a little 110 mile shake down. This with the addition of:
17” TRD Pro SEMA wheels (

$280 PTR20-35110-BK Toyota 2010-2024 4runner TRD 17" Matte Black Wheel PTR20-35110-BK

PTR20-35110-BK)
Falken Wildpeak AT3W in 245/70/17



An upgrade is an understatement. Bumps, cracks, potholes and surface transitions are buttery smooth in comparison to what I had spent the last year rolling around on. Before the upgrades I was sure to collect the initial hub-to-fender measurements with half a tank:
Front: 19.75”
Rear: 20.5”

Now, with half a tank after the fact:
Front: 22”
Rear: 24”

I’m excited to put many more miles down as the days continue to get longer.

 

https://www.tacomaworld.com/threads/cgs2k2-budget-build-tracking-sheet.614815/

 

Washed my truck today.
Easier now because it's dusty season; no more mud for a while...

Checked my air filter : very clean .
The precleaner on the snorkel does a great job, and it really prevent 80 % of the dust to reach the air filter

 

Welcome to TW!

 

Removed the coils that comes with the Bilstein 6112 kit and installed Eibach 700lb coils. Gained a little over 1" of lift on the same (4th notch) setting. Heavier duty coils were needed since the ARB bumper/winch install. Trucks sitting a lot more level now with a bit of rake still.

 

Oh hot dam that looks sexy

 

to run then over!!
Sounds like something id do!
I totally had sucess doing the chris fix way, no bubbles or anything.

Are you going to upgrade your lights then?

 

Nice truck

Whos the artist who did the wall?

 

Thanks! It’s always wild to me how MGM can have so many different appearances.