35in tires on OME 2.75in lift?

Was thinking of bumping up from 33s up to 35s on my truck since I’m due for tires. I am currently running and OME lift with Dakar’s in back with about 2.75in lift and about same lift in front with 885 coils and top plate spacer.

Got a few questions.
Other than a cab mount chop what else would I need to do in order to run to run 35s?

Wasn’t sure if I need to do the following:

1. Re gear
2. Get a performance chip
3. Lift her higher
3. Take fenders off completely or cut them back.
4. Have diff drop, but don’t know if I need another bigger one for 35s
5. New carrier bearing spacer needed for driveline?

I have a Pelfreybilt bumper up front so clearance is good towards front of front tires. Eventually planning on running Kings but wasn’t sure if I could get more lift out of them than OME lift.

Any tips are appreciated. Also wondering if those that have gone to 35s have had a lot of issues going through parts. Thanks in advance!