Ideas to fit Yeti Rambler into cupholders

The 3rd Gen has a ton of cupholders but they are all too small to fit the stainless steel bottles that are great to have around. I have this one that I am searching for a way to get into my truck without it rolling around on the seat or tipping over and hitting me in a turn:

https://www.yeti.com/en_US/drinkware/rambler-26-oz-bottle/YRAM26.html

Diameter is 3 3/8”. I’ve ordered several types of adapter, and looked at seat rail mounts, side mounts, etc but haven’t found anything that works. My ideal solution would be to take out the existing cup holder and then replace it with one that holds a larger diameter. Has anyone run into this problem and done this already?

Thanks!

 

Sounds like a good project for a 3D printer. Do you need a side job?

 

You want to modify a $35K truck for a $20 cup instead of finding a different cup?

 

$13 BottlePro Adjustable Cup Holder Adapter, Compatible with 32/40 Ounce Hydro Flasks, Iron Flasks, Takeyas, Simple Modern, Nalgenes, Fifty Fifty, Thermoflasks, Klean Kanteens

https://www.amazon.com/dp/B01M028L5E?ref=ppx_pop_mob_ap_share
This works very well for me. I put it in the cup holder behind the center arm rest.

 

This one from Walmart works great. It fits. Keeps coffee hot and costs less than $7.
https://www.walmart.com/ip/Ozark-Tr...Ef084MmKgOCQkTsVI-ANY71HJ8kqzDYxoCGQAQAvD_BwE

 

Might have to give this a try. Tired of my yeti always rolling off my seat onto the floor or smashing into my door, lol.

 

Crazy. Toyota didn’t consult with yeti when setting their cup holder dimensions in stone?

 

Crazy people getting their panties in a bunch for people asking a public forum if they have any tips for fitting THEIR cup of choice in THEIR truck.

SMH.

 

It’s weird though, because post number 8 seems to be hella wedgied. In fact, it’s the only bunched up set of panties I see in here.

Sell your thermos.

 

I use this for my hydroflask. Works well enough.

 

Serious. Tacoma comes in one size. Cups come in one hundred sizes. Logic man, logic.

 

Yet larger cups fit in my buddies 4runner, friends dodge with adjustable cup holders and i'm sure a lot of other vehicles. Cups aren't getting smaller, they're getting bigger. If this was about logic, Toyota would have at least put some different size holders or had adjustable ones. But that's besides the point, OP's just looking for some advice to fit his cup not to get shit on for tryin to modify his 35k truck

 

Your position in indefensible lol.
Change the cup, not the holder. This is like changing houses to fit a chair!

 

Cant resist the temptation, you bought the wrong truck, a second gen mt has plenty big cup holders.

 

I like my cup, man. It’s my special sippy cup.
But really, all my daily carry cups/rambles are large and don’t fit in my cup holders, that’s the whole point of this thread. Sure I could go out and buy a small cup to fit in it, but I don’t want a small cup that I have to refill 4x more times daily.

 

Alright. I understand. Question... why don't you buy a two gallon insulated jug and a small cup? That way, you have your cup for your truck and you carry your jug you only fill up every few days...

 

Not a bad idea. Maybe I’ll get one of those pressurized water ports and haul it in the back. Use it to wash my tears always from having too small of cup holders.

 

Adapt.

 

should have checked to see if cup fit prior to purchasing a 35+grand cup holder. I’m sure OP will find what they need. Best wishes.

 

This.